Download the PHP package pbmedia/php-ffmpeg without Composer

php-ffmpeg

An Object-Oriented library to convert video/audio files with FFmpeg / AVConv.

Check another amazing repo: PHP FFMpeg extras, you will find lots of Audio/Video formats there.

Your attention please

How this library works:

This library requires a working FFMpeg install. You will need both FFMpeg and FFProbe binaries to use it. Be sure that these binaries can be located with system PATH to get the benefit of the binary detection, otherwise you should have to explicitly give the binaries path on load.

For Windows users: Please find the binaries at http://ffmpeg.zeranoe.com/builds/.

Known issues:

• Using rotate and resize will produce a corrupted output when using libav 0.8. The bug is fixed in version 9. This bug does not appear in latest ffmpeg version.

Installation

The recommended way to install PHP-FFMpeg is through Composer.

Basic Usage

Documentation

This documentation is an introduction to discover the API. It's recommended to browse the source code as it is self-documented.

FFMpeg

FFMpeg\FFMpeg is the main object to use to manipulate medias. To build it, use the static FFMpeg\FFMpeg::create:

FFMpeg will autodetect ffmpeg and ffprobe binaries. If you want to give binary paths explicitly, you can pass an array as configuration. A Psr\Logger\LoggerInterface can also be passed to log binary executions.

Manipulate media

FFMpeg\FFMpeg creates media based on URIs. URIs could be either a pointer to a local filesystem resource, an HTTP resource or any resource supported by FFmpeg.

Note: To list all supported resource type of your FFmpeg build, use the -protocols command:

To open a resource, use the FFMpeg\FFMpeg::open method.

Two types of media can be resolved: FFMpeg\Media\Audio and FFMpeg\Media\Video. A third type, FFMpeg\Media\Frame, is available through videos.

Video

FFMpeg\Media\Video can be transcoded, ie: change codec, isolate audio or video. Frames can be extracted.

Transcoding

You can transcode videos using the FFMpeg\Media\Video:save method. You will pass a FFMpeg\Format\FormatInterface for that.

Please note that audio and video bitrate are set on the format.

Transcoding progress can be monitored in realtime, see Format documentation below for more information.

Extracting image

You can extract a frame at any timecode using the FFMpeg\Media\Video::frame method.

This code returns a FFMpeg\Media\Frame instance corresponding to the second 42. You can pass any FFMpeg\Coordinate\TimeCode as argument, see dedicated documentation below for more information.

If you want to extract multiple images from the video, you can use the following filter:

By default, this will save the frames as jpg images.

You are able to override this using setFrameFileType to save the frames in another format:

Clip

Cuts the video at a desired point. Use input seeking method. It is faster option than use filter clip.

The clip filter takes two parameters:

• $start, an instance of FFMpeg\Coordinate\TimeCode, specifies the start point of the clip
• $duration, optional, an instance of FFMpeg\Coordinate\TimeCode, specifies the duration of the clip

On clip you can apply same filters as on video. For example resizing filter.

Generate a waveform

You can generate a waveform of an audio file using the FFMpeg\Media\Audio::waveform method.

This code returns a FFMpeg\Media\Waveform instance. You can optionally pass dimensions as the first two arguments and an array of hex string colors for ffmpeg to use for the waveform, see dedicated documentation below for more information.

The output file MUST use the PNG extension.

If you want to get a waveform from a video, convert it in an audio file first.

Filters

You can apply filters on FFMpeg\Media\Video with the FFMpeg\Media\Video::addFilter method. Video accepts Audio and Video filters.

You can build your own filters and some are bundled in PHP-FFMpeg - they are accessible through the FFMpeg\Media\Video::filters method.

Filters are chainable

Rotate

Rotates a video to a given angle.

The $angle parameter must be one of the following constants :

• FFMpeg\Filters\Video\RotateFilter::ROTATE_90: 90° clockwise
• FFMpeg\Filters\Video\RotateFilter::ROTATE_180: 180°
• FFMpeg\Filters\Video\RotateFilter::ROTATE_270: 90° counterclockwise

Resize

Resizes a video to a given size.

The resize filter takes three parameters:

• $dimension, an instance of FFMpeg\Coordinate\Dimension
• $mode, one of the constants FFMpeg\Filters\Video\ResizeFilter::RESIZEMODE_* constants
• $useStandards, a boolean to force the use of the nearest aspect ratio standard.

If you want a video in a non-standard ratio, you can use the padding filter to resize your video in the desired size, and wrap it into black bars.

The pad filter takes one parameter:

• $dimension, an instance of FFMpeg\Coordinate\Dimension

Don't forget to save it afterwards.

Watermark

Watermark a video with a given image.

The watermark filter takes two parameters:

$watermarkPath, the path to your watermark file. $coordinates, an array defining how you want your watermark positioned. You can use relative positioning as demonstrated above or absolute as such:

Framerate

Changes the frame rate of the video.

The framerate filter takes two parameters:

• $framerate, an instance of FFMpeg\Coordinate\Framerate
• $gop, a GOP value (integer)

Synchronize

Synchronizes audio and video.

Some containers may use a delay that results in desynchronized outputs. This filter solves this issue.

Clip

Cuts the video at a desired point.

The clip filter takes two parameters:

• $start, an instance of FFMpeg\Coordinate\TimeCode, specifies the start point of the clip
• $duration, optional, an instance of FFMpeg\Coordinate\TimeCode, specifies the duration of the clip

Crop

Crops the video based on a width and height(a Point)

It takes two parameters:

• $point, an instance of FFMpeg\Coordinate\Point, specifies the point to crop
• $dimension, an instance of FFMpeg\Coordinate\Dimension, specifies the dimension of the output video

Audio

FFMpeg\Media\Audio can be transcoded too, ie: change codec, isolate audio or video. Frames can be extracted.

Transcoding

You can transcode audios using the FFMpeg\Media\Audio:save method. You will pass a FFMpeg\Format\FormatInterface for that.

Please note that audio kilobitrate is set on the audio format.

Transcoding progress can be monitored in realtime, see Format documentation below for more information.

Filters

You can apply filters on FFMpeg\Media\Audio with the FFMpeg\Media\Audio::addFilter method. It only accepts audio filters.

You can build your own filters and some are bundled in PHP-FFMpeg - they are accessible through the FFMpeg\Media\Audio::filters method.

Clipping

Cuts the audio at a desired point.

Metadata

Add metadata to audio files. Just pass an array of key=value pairs of all metadata you would like to add. If no arguments are passed into the filter all metadata will be removed from input file. Currently supported data is title, artist, album, artist, composer, track, year, description, artwork

Add artwork to the audio file

NOTE: at present ffmpeg (version 3.2.2) only supports artwork output for .mp3 files

Resample

Resamples an audio file.

The resample filter takes two parameters :

• $rate, a valid audio sample rate value (integer)

Frame

A frame is an image at a timecode of a video; see documentation above about frame extraction.

You can save frames using the FFMpeg\Media\Frame::save method.

This method has a second optional boolean parameter. Set it to true to get accurate images; it takes more time to execute.

Gif

A gif is an animated image extracted from a sequence of the video.

You can save gif files using the FFMpeg\Media\Gif::save method.

This method has a third optional boolean parameter, which is the duration of the animation. If you don't set it, you will get a fixed gif image.

Concatenation

This feature allows you to generate one audio or video file, based on multiple sources.

There are two ways to concatenate videos, depending on the codecs of the sources. If your sources have all been encoded with the same codec, you will want to use the FFMpeg\Media\Concatenate::saveFromSameCodecs which has way better performances. If your sources have been encoded with different codecs, you will want to use the FFMpeg\Media\Concatenate::saveFromDifferentCodecs.

The first function will use the initial codec as the one for the generated file. With the second function, you will be able to choose which codec you want for the generated file.

You also need to pay attention to the fact that, when using the saveFromDifferentCodecs method, your files MUST have video and audio streams.

In both cases, you will have to provide an array of files.

To concatenate videos encoded with the same codec, do as follow:

The boolean parameter of the save function allows you to use the copy parameter which accelerates drastically the generation of the encoded file.

To concatenate videos encoded with the same codec, do as follow:

More details about concatenation in FFMPEG can be found here, here and here.

Formats

A format implements FFMpeg\Format\FormatInterface. To save to a video file, use FFMpeg\Format\VideoInterface, and FFMpeg\Format\AudioInterface for audio files.

A format can also extend FFMpeg\Format\ProgressableInterface to get realtime information about the transcoding.

Predefined formats already provide progress information as events.

The callback provided for the event can be any callable.

Add additional parameters

You can add additional parameters to your encoding requests based on your video format.

The argument of the setAdditionalParameters method is an array.

Create your own format

The easiest way to create a format is to extend the abstract FFMpeg\Format\Video\DefaultVideo and FFMpeg\Format\Audio\DefaultAudio. and implement the following methods.

Coordinates

FFMpeg uses many units for time and space coordinates.

• FFMpeg\Coordinate\AspectRatio represents an aspect ratio.
• FFMpeg\Coordinate\Dimension represent a dimension.
• FFMpeg\Coordinate\FrameRate represent a framerate.
• FFMpeg\Coordinate\Point represent a point. (Supports dynamic points since v0.10.0)
• FFMpeg\Coordinate\TimeCode represent a timecode.

FFProbe

FFMpeg\FFProbe is used internally by FFMpeg\FFMpeg to probe medias. You can also use it to extract media metadata.

Validating media files

(since 0.10.0) You can validate media files using PHP-FFMpeg's FFProbe wrapper.

Using with Silex Microframework

The service provider is easy to set up:

Available options are as follow:

License

This project is licensed under the MIT license.

Music: "Favorite Secrets" by Waylon Thornton From the Free Music Archive CC BY NC SA

Music: "Siesta" by Jahzzar From the Free Music Archive CC BY SA