Download the PHP package clue/wol-react without Composer

On this page you can find all versions of the php package clue/wol-react. It is possible to download/install these versions without Composer. Possible dependencies are resolved automatically.

FAQ

After the download, you have to make one include require_once('vendor/autoload.php');. After that you have to import the classes with use statements.

Example:
If you use only one package a project is not needed. But if you use more then one package, without a project it is not possible to import the classes with use statements.

In general, it is recommended to use always a project to download your libraries. In an application normally there is more than one library needed.
Some PHP packages are not free to download and because of that hosted in private repositories. In this case some credentials are needed to access such packages. Please use the auth.json textarea to insert credentials, if a package is coming from a private repository. You can look here for more information.

  • Some hosting areas are not accessible by a terminal or SSH. Then it is not possible to use Composer.
  • To use Composer is sometimes complicated. Especially for beginners.
  • Composer needs much resources. Sometimes they are not available on a simple webspace.
  • If you are using private repositories you don't need to share your credentials. You can set up everything on our site and then you provide a simple download link to your team member.
  • Simplify your Composer build process. Use our own command line tool to download the vendor folder as binary. This makes your build process faster and you don't need to expose your credentials for private repositories.
Please rate this library. Is it a good library?

Example code of clue/wol-react

Informations about the package wol-react

clue/wol-react Build Status

Turn on your PC with Wake-On-LAN (WOL) requests

Note: This project is in beta stage! Feel free to report any issues you encounter.

Usage

Once installed, using this library is as simple as running:

If your environment requires a non-default broadcast address (the default is: 255.255.255.255:7), for example 1.2.3.4:9. You can pass that to the createSender method on the Factory. For example:

There's also a CLI script in bin/wol.php to send a WOL request from the command line simply by running:

Introduction

The following short introduction is mostly taken from wikipedia's article about WOL:

Wake-on-LAN ("WOL") is implemented using a specially designed packet called a magic packet, which is sent to the computer to be woken up. The magic packet contains the MAC address of the destination computer. Powered-down computers capable of Wake-on-LAN will contain network devices able to "listen" to incoming packets in low-power mode while the system is powered down. If a magic packet is received that is directed to the device's MAC address, the NIC signals the computer's power supply to initiate system wake-up, much in the same way as pressing the power button would do.

The magic packet is a broadcast frame containing anywhere within its payload 6 bytes of all 255 (FF FF FF FF FF FF in hexadecimal), followed by sixteen repetitions of the target computer's 48-bit MAC address, for a total of 102 bytes.

Since the magic packet is only scanned for the string above, and not actually parsed by a full protocol stack, it may be sent as any network- and transport-layer protocol, although this library uses a typical UDP datagram. The magic packet is usually sent on the data link layer (layer 2 in the OSI model) and when sent, is broadcast to all attached devices on a given network, using the network broadcast address; the IP-address (layer 3 in the OSI model) is not used.

Install

The recommended way to install this library is through composer. New to composer?

License

MIT

All versions of wol-react with dependencies

PHP Build Version
Package Version
Requires clue/socket-react Version 0.2.*
Composer command for our command line client (download client) This client runs in each environment. You don't need a specific PHP version etc. The first 20 API calls are free. Standard composer command

The package clue/wol-react contains the following files

Loading the files please wait ....