Libraries tagged by Out Of Stock

Turbo Laravel gives you a set of conventions to make the most out of the Hotwire stack (inspired by turbo-rails gem).

Go to Download

Connect brokerage accounts to your app for live positions and trading. ## Rate limiting Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`. - **Customer-level** — 250 requests/minute by default, scoped to your `clientId` and applied across all endpoints. Reported in `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to (`clientId`, `accountId`). All covered operations for one account draw on the same bucket — reading balances and reading positions share it — and enforcement does not depend on the HTTP method, so updating an account consumes the same bucket as reading it. Only enforced for Personal users, and only for integrations it has been rolled out to — it is not yet in force for every Personal integration. It also does not apply on every operation that documents a 429 below. Where it applies it is reported in `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and `X-RateLimit-Account-Reset`. Do not read the absence of those headers as proof the limit is off — some configurations omit the rate limit headers while still enforcing the limit, so header absence tells you nothing about your allowance. On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter. Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed. Because the customer-level limit applies everywhere, any signed request can return 429. **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers. See https://docs.snaptrade.com/docs/ratelimiting.

Go to Download

Connect brokerage accounts to your app for live positions and trading. ## Rate limiting Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`. - **Customer-level** — 250 requests/minute by default, scoped to your `clientId` and applied across all endpoints. Reported in `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to (`clientId`, `accountId`). All covered operations for one account draw on the same bucket — reading balances and reading positions share it — and enforcement does not depend on the HTTP method, so updating an account consumes the same bucket as reading it. Only enforced for Personal users, and only for integrations it has been rolled out to — it is not yet in force for every Personal integration. It also does not apply on every operation that documents a 429 below. Where it applies it is reported in `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and `X-RateLimit-Account-Reset`. Do not read the absence of those headers as proof the limit is off — some configurations omit the rate limit headers while still enforcing the limit, so header absence tells you nothing about your allowance. On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter. Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed. Because the customer-level limit applies everywhere, any signed request can return 429. **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers. See https://docs.snaptrade.com/docs/ratelimiting.

Go to Download

A fluent, self-contained modal/dialog system for Livewire — open any Livewire component in a stacked, accessible dialog with one line, style it with a soft, modern design system out of the box.

Go to Download

A full-stack framework for Laravel that takes the hassle out of building dynamic pages.

Go to Download

The complete Hotwire stack for Laravel — Turbo Drive, Turbo Streams, Stimulus controllers and Blade components out of the box.

Go to Download

LaraGrid is a powerful and customizable grid system package for Laravel. It provides an easy way to create sortable, filterable tables with pagination. The package is designed to be highly customizable, allowing developers to define columns, apply filters, and sort data with ease.Key Features:- **Column Definition**: LaraGrid allows you to define the columns that will be displayed in the grid. You can specify the model field and the label for each column.- **Filters**: The package provides several filter classes out of the box, including text, select, date, and boolean filters. These filters can be applied to the columns to filter the grid's data based on user input.- **Sorting**: LaraGrid supports sorting of data based on any column. It also provides support for sorting data based on a related model's field using PowerJoins.- **Pagination**: The package integrates with Laravel's pagination system, allowing you to easily paginate the data in the grid.- **Customizable Appearance**: LaraGrid allows you to customize the appearance of the grid by extending the `BaseLaraGridTheme` class and setting the desired CSS classes.- **Livewire Integration**: LaraGrid is built with Livewire, a full-stack framework for Laravel that makes building dynamic interfaces simple, without leaving the comfort of Laravel.The package is currently in development and is not ready for use in production. It requires PHP 8.1 or higher and Laravel 10.0 or higher.

Go to Download

## Introduction This comprehensive guide will equip you with the knowledge to integrate and leverage our Product Configurator Service in your applications. ## Quick Start Get up and running in no time! Follow these steps to kickstart your integration: 1. **Authentication:** Obtain your integration JWT to authenticate your requests. 2. **Client Libraries:** Explore our GitHub repositories to grab client libraries in your preferred programming language. 3. **API Overview:** Familiarize yourself with our RESTful API using the OpenAPI specification. ## Integration ### API Overview Our RESTful API is the gateway to unlocking the full potential of Product Configurator. Check out the detailed [API Reference](/docs/category/configurator) for a granular understanding of each endpoint and request/response format. ### Client Libraries To expedite your integration process, we provide client libraries for various programming languages. Find the one that suits your stack in our [GitHub repositories](https://github.com/Gemini-Commerce). ### Authentication Security is paramount. Learn how to authenticate your requests using JWT. This ensures a secure and reliable connection between your application and Product Configurator. ## Configuration Management ### Configurator Lifecycle Understand the lifecycle of configurators, from draft to active and deleted. This flexibility allows you to manage configurations at your own pace. ### Steps and Options Configure product steps with ease and define options effortlessly. Explore the power of dependencies to create dynamic and intuitive configurations. ### Matrices Delve into matrices—your secret weapon. Explore price and weight matrices, and learn how configured steps influence properties and pricing. ### Price Management Unleash dynamic pricing with our versatile price matrices. From fixed prices to incremental structures, adapt to diverse pricing models effortlessly. ## Security Your data is in safe hands. Discover how Product Configurator ensures security through JWT authentication, safeguarding your sensitive information. ## Backward Compatibility Stay ahead of the curve. Learn about our versioning strategy, providing backward compatibility while allowing our service to evolve seamlessly. ## Developer Support Have questions? Need assistance? Write to us at [[email protected]](mailto:[email protected]) and we will get back to you.

Go to Download