Libraries tagged by responsive menu

## API Versioning We're constantly updating and improving the API, and while we try to ensure backwards compatibility, there's always a chance that we'll introduce a change that affects the way your app works. To get around any problems that this might cause, we recommend that you include the Accept header with every API request that you make. This header enables you to target your request to a particular version of the API. It looks like this in HTTP: ```text Accept: application/vnd.saitowag.api+json;version={version_number} ``` Normally, you set the value of the placeholder to the current version of the API. But if you're troubleshooting your app, and you know that an older version of the API works perfectly, say version 1.0, you'd substitute 1.0 for the placeholder value. The API then handles the request as if it were for version 1.0, and your app goes back to working properly. ### Example of an error with invalid `ACCEPT` header. The `HTTP status code` in case of an invalid `ACCEPT` header will be `400 Bad Request` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_ACCEPT_HEADER_NOT_VALID", "error_message": "Accept header is not valid or not set." } ] } ``` ### Unexpected Error If an unexpected error occours, a so called Error General will be returned. The `HTTP status code` in case of an invalid `ACCEPT` header will be `500` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_GENERAL", "error_message": "An unexpected error has occurred. If this problem persists, please contact our support." } ] } ``` ### Invalid Endpoint Error Any call to a non-existing API endpoint (i.e. wrong route) will return a response with `HTTP status code` `404` and the following response body: ```json { "data": [ { "error_code": "ERR_GENERAL_INVALID_ENDPOINT", "error_message": "The requested endpoint does not exist." } ] } ``` Please, note that this error is returned also when a request parameter, part of a valid route, is not well formed. For example, a call to a route that contains a wrong order id (i.e. it does not meet the accepted order id pattern - e.g. 123456789PAC instead of PAC123456789) will return the error just mentioned, as the route is considered as badly formed. In conclusion, please pay special attention to all those routes that have request parameters with specific pattern requirements. ### Shipping Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | Standard `Standard` | | 2 | Self-collection `Selbstabholung` | | 3 | Express morning (truck) `Express-Morgen (LKW)` | | 4 | Express Today (Truck) `Express-Heute (LKW)` | | 5 | Express morning (package forwarding) `Express-Morgen (Packet Spedition)` | | 7 | Express-now | ### Payment Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | SEPA Direct Debit `SEPA-Lastschrift` | | 2 | Prepayment `Vorkasse` | | 3 | Cash on delivery `Nachnahme` | | 4 | PayPal/Credit Card `PayPal/Kreditkarte` | | 5 | open payment method `offene Zahlungsart` | | 7 | Invoice(8 days payment term) `Rechnung(8 Tage Zahlungsziel)` | | 8 | open payment method (SEPA) `offene Zahlungsart (SEPA)` | ## Query String Filters Query String Filters | Operator | Full Name | Description | Example | | ------ | ------ | ------ | ------ | | eq | Equal | Used to narrow down the result of a query to some specific value, for specified field. It adds the "**=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=eq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} = 11` | integer: `{url}?filter[id]=eq;21`float: `{url}?filter[average]=eq;3.7`string: `{url}?filter[free_text]=eq;apple`Date: `{url}?filter[birthday]=eq;2020-06-03`DateTime: `{url}?filter[created_at]=eq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=eq;1` | | neq | Not equal | Used to exclude the value from a query result. It adds the "****" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=neq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} 11` | integer: `{url}?filter[id]=neq;21`float: `{url}?filter[average]=neq;3.7`string: `{url}?filter[free_text]=neq;apple`Date: `{url}?filter[birthday]=neq;2020-06-03`DateTime: `{url}?filter[created_at]=neq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=neq;1` | | gt | Greater than | Used to reduce fetched values to those greater than the one provided in a query string. It adds the "**>**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gt;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} > 11` | integer: `{url}?filter[id]=gt;21`float: `{url}?filter[average]=gt;3.7`Date: `{url}?filter[birthday]=gt;2020-06-03`DateTime: `{url}?filter[created_at]=gt;2020-06-03 14:32:32` | | gte | Greater than or equal | Used to reduce fetched values to those greater than or equal to the one provided in a query string. It adds the "**>=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gte;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} >= 11` | integer: `{url}?filter[id]=gte;21`float: `{url}?filter[average]=gte;3.7`Date: `{url}?filter[birthday]=gte;2020-06-03`DateTime: `{url}?filter[created_at]=gte;2020-06-03 14:32:32` | | lt | Less than | Used to reduce fetched values to those less than provided in a query string. It adds the "**

Go to Download

## API Versioning We're constantly updating and improving the API, and while we try to ensure backwards compatibility, there's always a chance that we'll introduce a change that affects the way your app works. To get around any problems that this might cause, we recommend that you include the Accept header with every API request that you make. This header enables you to target your request to a particular version of the API. It looks like this in HTTP: ```text Accept: application/vnd.saitowag.api+json;version={version_number} ``` Normally, you set the value of the placeholder to the current version of the API. But if you're troubleshooting your app, and you know that an older version of the API works perfectly, say version 1.0, you'd substitute 1.0 for the placeholder value. The API then handles the request as if it were for version 1.0, and your app goes back to working properly. ### Example of an error with invalid `ACCEPT` header. The `HTTP status code` in case of an invalid `ACCEPT` header will be `400 Bad Request` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_ACCEPT_HEADER_NOT_VALID", "error_message": "Accept header is not valid or not set." } ] } ``` ### Unexpected Error If an unexpected error occours, a so called Error General will be returned. The `HTTP status code` in case of an invalid `ACCEPT` header will be `500` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_GENERAL", "error_message": "An unexpected error has occurred. If this problem persists, please contact our support." } ] } ``` ### Invalid Endpoint Error Any call to a non-existing API endpoint (i.e. wrong route) will return a response with `HTTP status code` `404` and the following response body: ```json { "data": [ { "error_code": "ERR_GENERAL_INVALID_ENDPOINT", "error_message": "The requested endpoint does not exist." } ] } ``` Please, note that this error is returned also when a request parameter, part of a valid route, is not well formed. For example, a call to a route that contains a wrong order id (i.e. it does not meet the accepted order id pattern - e.g. 123456789PAC instead of PAC123456789) will return the error just mentioned, as the route is considered as badly formed. In conclusion, please pay special attention to all those routes that have request parameters with specific pattern requirements. ### Shipping Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | Standard `Standard` | | 2 | Self-collection `Selbstabholung` | | 3 | Express morning (truck) `Express-Morgen (LKW)` | | 4 | Express Today (Truck) `Express-Heute (LKW)` | | 5 | Express morning (package forwarding) `Express-Morgen (Packet Spedition)` | | 7 | Express-now | ### Payment Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | SEPA Direct Debit `SEPA-Lastschrift` | | 2 | Prepayment `Vorkasse` | | 3 | Cash on delivery `Nachnahme` | | 4 | PayPal/Credit Card `PayPal/Kreditkarte` | | 5 | open payment method `offene Zahlungsart` | | 7 | Invoice(8 days payment term) `Rechnung(8 Tage Zahlungsziel)` | | 8 | open payment method (SEPA) `offene Zahlungsart (SEPA)` | ## Query String Filters Query String Filters | Operator | Full Name | Description | Example | | ------ | ------ | ------ | ------ | | eq | Equal | Used to narrow down the result of a query to some specific value, for specified field. It adds the "**=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=eq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} = 11` | integer: `{url}?filter[id]=eq;21`float: `{url}?filter[average]=eq;3.7`string: `{url}?filter[free_text]=eq;apple`Date: `{url}?filter[birthday]=eq;2020-06-03`DateTime: `{url}?filter[created_at]=eq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=eq;1` | | neq | Not equal | Used to exclude the value from a query result. It adds the "****" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=neq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} 11` | integer: `{url}?filter[id]=neq;21`float: `{url}?filter[average]=neq;3.7`string: `{url}?filter[free_text]=neq;apple`Date: `{url}?filter[birthday]=neq;2020-06-03`DateTime: `{url}?filter[created_at]=neq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=neq;1` | | gt | Greater than | Used to reduce fetched values to those greater than the one provided in a query string. It adds the "**>**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gt;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} > 11` | integer: `{url}?filter[id]=gt;21`float: `{url}?filter[average]=gt;3.7`Date: `{url}?filter[birthday]=gt;2020-06-03`DateTime: `{url}?filter[created_at]=gt;2020-06-03 14:32:32` | | gte | Greater than or equal | Used to reduce fetched values to those greater than or equal to the one provided in a query string. It adds the "**>=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gte;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} >= 11` | integer: `{url}?filter[id]=gte;21`float: `{url}?filter[average]=gte;3.7`Date: `{url}?filter[birthday]=gte;2020-06-03`DateTime: `{url}?filter[created_at]=gte;2020-06-03 14:32:32` | | lt | Less than | Used to reduce fetched values to those less than provided in a query string. It adds the "**

Go to Download

Content Security Policy plugin for PhalconPHP framework.

Go to Download

Cloud CRM REST API je programové rozhraní systému RAYNET CRM, které umožňuje pracovat s daty uvnitř CRM z aplikací třetích stran. Komunikace probíhá standardním protokolem HTTP s ohledem na [REST](https://en.wikipedia.org/wiki/Representational_state_transfer) principy. ## Připojení k RAYNET CRM Komunikačním protokolem je HTTP, proto je možné použít libovolnou aplikaci nebo knihovnu, která tento protokol podporuje. Pro demonstraci bude využita aplikace [curl](https://curl.haxx.se/). Alternativou je například add-on [Talend API Tester](https://chrome.google.com/webstore/detail/talend-api-tester-free-ed/aejoelaoggembcahagimdiliamlcdmfm) do prohlížeče Google Chrome. Přístup je zabezpečen pomocí basic authentication (uživatelským jménem a API klíčem) a šifrován protokolem TLSv1.2 a vyšším (HTTPS) pro zajištění maximální bezpečnosti. V hlavičce požadavku je nutné zaslat název Vaší instance (např. `moje-crm`). ```bash curl -X GET -u 'uzivatel:api-klic' -H 'X-Instance-Name: moje-crm' 'https://app.raynet.cz/api/v2/company/' ``` ## Datové typy Hodnoty jednotlivých atributů v systému RAYNET CRM jsou tvořeny několika základními datovými typy: + `Řetězec` - Textová hodnota. + `Číslo` - Číselná hodnota. V závislosti na kontextu se může jednat buď o číslo celé nebo o číslo desetinné. V desetinných číslech se používá desetinná tečka. + `Pravdivostní hodnota` - Hodnota ANO/NE. Pro hodnotu ANO lze využít true, on, yes a 1; pro hodnotu NE pak false, off, no a 0. + `Datum` - Datum jako řetězec ve formátu `yyyy-MM-dd`. + `Datum a čas` - Datum a čas jako řetězec ve formátu `yyyy-MM-dd HH:mm`. Akceptovány jsou také datum a čas ve formátu ISO8601 (např. `2022-01-01T12:00:00.000+01:00`). + `Reference` - Datový typ reference odkazuje na jiný záznam v systému RAYNET CRM. V příchozích datech je reference mapou (JavaScriptový objektem), která obsahuje klíče: + id - Identifikátor referencovaného záznamu. ### Datum a čas Datum a čas jako řetězec ve formátu `yyyy-MM-dd HH:mm` je v časové zóně uživatele, přes kterého jsou API požadavky realizovány. Pro filtrování a zápis (`PUT`, `POST`) je možné využít oba formáty (`yyyy-MM-dd HH:mm`, ISO8601). V response je ve výchozím stavu datum a čas formátován jako `yyyy-MM-dd HH:mm` v časové zóně uživatele. Přidáním parametru `dateFormat=ISO8601` lze ovlivnit výstupní formát, kdy bude hodnota formátována do tvaru `2022-01-01T12:00:00.000+01:00`. např. `https://ww....company/?dateFormat=ISO8601` ## Filtrování seznamu Operátory pracující nad atributy a hodnotami jsou následující: + `EQ` - Test na rovnost hodnot. + `EQ_OR_NULL` - Test na rovnost nebo prázdnou hodnotu. + `NE` - Test na nerovnost hodnot. + `NE_OR_NULL` - Test na nerovnost nebo prázdnou hodnotu. + `LT` - Hodnota v databázi je menší než zadaná. + `LE` - Hodnota v databázi je menší nebo rovna než zadaná. + `GT` - Hodnota v databázi je větší než zadaná. + `GE` - Hodnota v databázi je větší nebo rovna než zadaná. + `LIKE` - Test na hodnotu odpovídající výrazu (např. hodnota filtru ABC% nalezne všechny záznamy, které začínají znaky ABC). + `LIKE_NOCASE` - Obdoba LIKE, ale bez ohledu na malá a velká písmena. + `IN` - Test na rovnost (více) hodnot oddělených čárkou. Správný formát vstupu je např.: `1,2,3,4`. + `NOT_IN` - Test na nerovnost (více) hodnot oddělených čárkou. Správný formát vstupu je např.: `1,2,3,4`. + `CUSTOM` - Speciální operátor - chování testu je popsáno dále v dokumentaci. Výchozím operátorem je rovnost `EQ`. Operátor se zapisuje do hranatých závorek za název atributu. Je tak možné zadat více filtrovacích kritérií nad stejným atributem. `https://app..../?validFrom[GT]="2014-06-01"&validTill[LT]="2014-06-10"` Častým scénářem je vyfiltrování všech záznamů, které mají daný atribut prázdný nebo naopak neprázdný. Pro tyto účely lze použít hodnotu `prázdný řetězec` v kombinaci s operátorem `EQ` nebo `NE`. ## Uspořádání seznamu Uspořádání seznamu je kontrolováno parametrem `sortColumn` a `sortDirection`. U každého API je výčet hodnot, pomocí kterých lze seznam řadit. Parametr `sortDirection` může nabývat hodnot: + `ASC` - Hodnoty jsou řazeny vzestupně + `DESC` - Hodnoty jsou řazeny sestupně ## Stránkování seznamu Seznam je možné stránkovat nastavením parametrů `offset` a `limit`. Offset udává první záznam, který bude zobrazen, limit pak počet záznamů. Maximální velikost stránky je 1 000 položek. Například `https://app..../?offset=0&limit=2` ## Fulltext Ve většině seznamů je možné využít fulltextové vyhledání podle zadaného textového řetězce. Slouží k tomu parametr `fulltext`, který se aplikuje např. takto: `https://app..../?fulltext=nejakytext` ## Limity API Každá API odpověď obsahuje hlavičky, které popisují stav využití API pro danou instanci. ``` curl -X GET -u 'uzivatel:api-klic' -H 'X-Instance-Name: moje-crm' 'https://app.raynet.cz/api/v2/company/' HTTP/1.1 200 OK Status: 200 OK X-Ratelimit-Limit: 24000 X-Ratelimit-Remaining: 23999 X-Ratelimit-Reset: 1508889600 ``` Význam jednotlivých hlaviček je následující: | Hlavička | Význam | | -------- | ------ | | X-Ratelimit-Limit | Celkový limit pro aktuální časové okno a instanci. | | X-Ratelimit-Remaining | Zbývající počet požadavků. | | X-Ratelimit-Reset | Čas, kdy bude vyprší časové okno a limit bude resetován. Hodnota udává [unixový čas](https://cs.wikipedia.org/wiki/Unixov%C3%BD_%C4%8Das). | Pokud je limit překročen, je navrácena chybová hláška s HTTP kódem `429 Too Many Requests`: ```json { "type": "RequestLimitReached", "message": "API request limit reached. See the X-RateLimit-* headers and check out the API documentation for more details." } ``` ### Co když mi limity nestačí Ve výchozím stavu je přístup limitován na 24 000 požadavků za den (uvažováno od půlnoci do další půlnoci v časové zóně UTC). V případě, že limit pro vaši integraci nestačí, kontaktujte naší zákaznickou podporu na e-mailu [email protected] a spolu se určitě dobereme vhodného řešení. ### Špatné přihlášení V případě zaslaní více než 20 požadavků se špatnými přihlašovacími údaji, bude tento přístup na 60 minut zablokován. Toto omezení platí pro konkrétní IP adresu.

Go to Download

The [Invoicetronic API][2] is a RESTful service that allows you to send and receive invoices through the Italian [Servizio di Interscambio (SDI)][1], or Interchange Service. The API is designed to be simple and easy to use, abstracting away SDI complexity while providing complete control over the invoice send/receive process. It provides advanced features as encryption at rest, multi-language pre-flight invoice validation, multiple upload formats, webhooks, event logging, client SDKs, and CLI tools. For more information, see [Invoicetronic website][2] ## Before you start For the full integration guide, tutorials, SDKs and quickstarts, see the **[Documentation](https://invoicetronic.com/en/docs/)**. A few cross-cutting topics worth knowing before integrating: - **[Prerequisites](https://invoicetronic.com/en/docs/prerequisites/)** — what you need to start in Sandbox and what's required to move to production. - **[API Keys](https://invoicetronic.com/en/docs/apikeys/)** — how `ik_live_` and `ik_test_` keys select the environment. - **[Sandbox](https://invoicetronic.com/en/docs/sandbox/)** — free test environment that mirrors the live workflow, with no credits consumed. - **[Rate Limiting](https://invoicetronic.com/en/docs/ratelimiting/)** — per-second, per-minute and per-day limits; how to handle `429 Too Many Requests`. - **[Pagination](https://invoicetronic.com/en/docs/pagination/)** — `page` and `page_size` parameters and the `Invoicetronic-Total-Count` response header. - **[CORS](https://invoicetronic.com/en/docs/cors/)** — calling the API from the browser; allowed origins are configured per key. - **[Webhooks](https://invoicetronic.com/en/docs/webhooks/)** — real-time event notifications with HMAC-SHA256 signature validation. - **[Localization](https://invoicetronic.com/en/docs/accept-language/)** — use the `Accept-Language` header to receive error messages in Italian, English or German. [1]: https://www.fatturapa.gov.it/it/sistemainterscambio/cose-il-sdi/ [2]: https://invoicetronic.com/

Go to Download

REST API for electronic invoicing in France: Factur-X (CII), UBL 2.1, AFNOR PDP/PA, electronic signatures. ## 🎯 Main Features ### 📄 Invoice Generation - **Formats**: CII XML, UBL 2.1 XML, or Factur-X PDF/A-3 - **Profiles** (CII/PDF): MINIMUM, BASIC, EN16931, EXTENDED - **UBL**: Always EN16931 compliant - **Standards**: EN 16931 (EU directive 2014/55), ISO 19005-3 (PDF/A-3), CII (UN/CEFACT), UBL 2.1 (OASIS) - **Simplified Format**: Generation from SIRET + auto-enrichment (Chorus Pro API + Business Search) ### ✅ Factur-X - Validation - **XML Validation**: Schematron (45 to 210+ rules depending on profile) - **PDF Validation**: PDF/A-3, Factur-X XMP metadata - **VeraPDF**: Strict PDF/A validation (146+ ISO 19005-3 rules) ### ✍️ Electronic Signature - **Standards**: PAdES-B-B, PAdES-B-T (RFC 3161 timestamping), PAdES-B-LT (long-term archival) - **eIDAS Levels**: SES (self-signed), AdES (commercial CA), QES (QTSP) - **Validation**: Cryptographic integrity and certificate verification ### 📋 Flux 6 - Invoice Lifecycle (CDAR) - **CDAR Messages**: Acknowledgements, invoice statuses - **PPF Statuses**: REFUSED (210), PAID (212) ### 📊 Flux 10 - E-Reporting - **Tax Declarations**: International B2B, B2C - **Flow Types**: 10.1 (B2B transactions), 10.2 (B2B payments), 10.3 (B2C transactions), 10.4 (B2C payments) ### 📡 AFNOR PDP/PA (XP Z12-013) - **Flow Service**: Submit and search flows to PDPs - **Directory Service**: Company search (SIREN/SIRET) - **Multi-client**: Support for multiple PDP configs per user ### 🏛️ Chorus Pro - **Public Sector Invoicing**: Complete API for Chorus Pro ### ⏳ Async Tasks - **Celery**: Asynchronous generation, validation and signing - **Polling**: Status tracking via `/tasks/{task_id}/status` - **Webhooks**: Automatic notifications when tasks complete ## 🔒 Authentication All requests require a **JWT token** in the Authorization header: ``` Authorization: Bearer YOUR_JWT_TOKEN ``` ### How to obtain a JWT token? #### 🔑 Method 1: `/api/token/` API (Recommended) **URL:** `https://factpulse.fr/api/token/` This method is **recommended** for integration in your applications and CI/CD workflows. **Prerequisites:** Having set a password on your account **For users registered via email/password:** - You already have a password, use it directly **For users registered via OAuth (Google/GitHub):** - You must first set a password at: https://factpulse.fr/accounts/password/set/ - Once the password is created, you can use the API **Request example:** ```bash curl -X POST https://factpulse.fr/api/token/ \ -H "Content-Type: application/json" \ -d '{ "username": "[email protected]", "password": "your_password" }' ``` **Optional `client_uid` parameter:** To select credentials for a specific client (PA/PDP, Chorus Pro, signing certificates), add `client_uid`: ```bash curl -X POST https://factpulse.fr/api/token/ \ -H "Content-Type: application/json" \ -d '{ "username": "[email protected]", "password": "your_password", "client_uid": "550e8400-e29b-41d4-a716-446655440000" }' ``` The `client_uid` will be included in the JWT and allow the API to automatically use: - AFNOR/PDP credentials configured for this client - Chorus Pro credentials configured for this client - Electronic signature certificates configured for this client **Response:** ```json { "access": "eyJ0eXAiOiJKV1QiLCJhbGc...", // Access token (validity: 30 min) "refresh": "eyJ0eXAiOiJKV1QiLCJhbGc..." // Refresh token (validity: 7 days) } ``` **Advantages:** - ✅ Full automation (CI/CD, scripts) - ✅ Programmatic token management - ✅ Refresh token support for automatic access renewal - ✅ Easy integration in any language/tool #### 🖥️ Method 2: Dashboard Generation (Alternative) **URL:** https://factpulse.fr/api/dashboard/ This method is suitable for quick tests or occasional use via the graphical interface. **How it works:** - Log in to the dashboard - Use the "Generate Test Token" or "Generate Production Token" buttons - Works for **all** users (OAuth and email/password), without requiring a password **Token types:** - **Test Token**: 24h validity, 1000 calls/day quota (free) - **Production Token**: 7 days validity, quota based on your plan **Advantages:** - ✅ Quick for API testing - ✅ No password required - ✅ Simple visual interface **Disadvantages:** - ❌ Requires manual action - ❌ No refresh token - ❌ Less suited for automation ### 📚 Full Documentation For more information on authentication and API usage: https://factpulse.fr/documentation-api/

Go to Download

MNB ScraperKit V1.0.3 - enterprise-ready PHP crawling and data extraction framework with AI crawl intelligence, search discovery, authorized mail/webmail extraction connectors, publisher metadata workflows, extraction recipes, provenance, quality reports, datasets, queues, dashboards, and compliance tooling.

Go to Download

Es un generador de excepciones, su fin es lanzar excepciones controladas al usuario con la posibilidad de generar log detallados al desarollador. El paquete es capaz de detectar una application/json de una peticion http por defecto. Este paquete entrega al usuario una vista en caso de ser http normal en donde se vera mensaje del error y un codigo de error, si la peticion es JSON el error sera devuelto en un resonse en formato JSON.

Go to Download

**API Version**: 1.7 **Date**: 9th July, 2024 ## 📄 Getting Started This API is based on the REST API architecture, allowing the user to easily manage their data with this resource-based approach. Every API call is established on which specific request type (GET, POST, PUT, DELETE) will be used. The API must not be abused and should be used within acceptable limits. To start using this API, you will need not create or access an existing Segnivo account to obtain your API key ([retrievable from your account settings](https://messaging.segnivo.com/account/api)). - You must use a valid API Key to send requests to the API endpoints. - The API only responds to HTTPS-secured communications. Any requests sent via HTTP return an HTTP 301 redirect to the corresponding HTTPS resources. - The API returns request responses in JSON format. When an API request returns an error, it is sent in the JSON response as an error key or with details in the message key. ### 🔖 **Need some help?** In case you have questions or need clarity with interacting with some endpoints feel free to create a support ticket on your account or you can send an email ([[email protected]](https://mailto:[email protected])) directly and we would be happy to help. --- ## Authentication As noted earlier, this API uses API keys for authentication. You can generate a Segnivo API key in the [API](https://messaging.segnivo.com/account/api) section of your account settings. You must include an API key in each request to this API with the `X-API-KEY` request header. ### Authentication error response If an API key is missing, malformed, or invalid, you will receive an HTTP 401 Unauthorized response code. ## Rate and usage limits API access rate limits apply on a per-API endpoint basis in unit time. The limit is 10k requests per hour for most endpoints and 1m requests per hour for transactional/relay email-sending endpoints. Also, depending on your plan, you may have usage limits. If you exceed either limit, your request will return an HTTP 429 Too Many Requests status code or HTTP 403 if sending credits have been exhausted. ### 503 response An HTTP `503` response from our servers may indicate there is an unexpected spike in API access traffic, while this rarely happens, we ensure the server is usually operational within the next two to five minutes. If the outage persists or you receive any other form of an HTTP `5XX` error, contact support ([[email protected]](https://mailto:[email protected])). ### Request headers To make a successful request, some or all of the following headers must be passed with the request. | **Header** | **Description** | | --- | --- | | Content-Type | Required and should be `application/json` in most cases. | | Accept | Required and should be `application/json` in most cases | | Content-Length | Required for `POST`, `PATCH`, and `PUT` requests containing a request body. The value must be the number of bytes rather than the number of characters in the request body. | | X-API-KEY | Required. Specifies the API key used for authorization. | ##### 🔖 Note with example requests and code snippets If/when you use the code snippets used as example requests, remember to calculate and add the `Content-Length` header. Some request libraries, frameworks, and tools automatically add this header for you while a few do not. Kindly check and ensure yours does or add it yourself.

Go to Download

# Introduction The Congressus API allows you to interact with your Congressus administration. The API is RESTful and uses JSON to transport information. This documentation aims to get you started with your first requests. Make sure to read this introduction completely to know all aspects of our API. ## REST basics A REST API describes the resources you can access in a clearly defined path structure. This documentation contains a reference for each resource in the API. Before you can use these resources, you need to know the basics of accessing the Congressus REST API. **Paths and versioning** The Congressus API resides on the following paths: https://api.congressus.nl/ `version` / `resource_path` ? `query_params` - The `version` part of the path indicates the version of the API you want to use. At this moment version v30 is the current version. By pointing to a specific version, we can make sure you always can expect equal behaviour from our API. - The `resource_path` part indicates the path of the resource you want to access. Specific paths to resources can be found in the API documentation. Examples of resource paths are: /members to retrieve all members or /member/ `obj_id` /statuses to create new member status for a member. - The `query_params` contains all filtering, ordering and pagination information. ## Authentication The current authentication flow present at Congressus API is by the use of the Bearer Token suggested by OAuth 2.0. To interact with the Congressus API, you must authenticate by supplying the header `Authorization` with the value `Bearer {access_token}`. **How do I get an API key?** You can create new apps and API keys in Congressus Manager through [this link](https://manager.congressus.nl/settings/integrations/apps). ## Requests There are different approaches for making requests to our API. The command line tool [curl](https://curl.se/) is easy and fast for testing our API. When you want to integrate the API into your own software, you can choose to use a general purpose REST library or to [create your own API client library](https://github.com/OpenAPITools/openapi-generator) based on our OpenAPI specs. ## Responses Congressus uses conventional HTTP response codes to indicate success or failure of an API request. In general, codes in the 2xx range indicate success, codes in the 4xx range indicate an error that resulted from the provided information (e.g. a required parameter was missing or input data was invalid), and codes in the 5xx range indicate an error with the Congressus API. ## Pagination Endpoints returning a list of entities, are paginated to prevent large responses. To control the pagination, you can use the `page` and `page_size` parameters. page determines which page to return (default: 1), page_size controls the amount of entities to return (default: 25, maximum: 100). Each paginated response contains the following information: - `has_prev` bool - `prev_num` int with previous page number - `has next` bool - `next_num` int with next page number - `data` list with results on current page - `total` int with total number of results ## Filtering Most list endpoints support filtering to get a subset of the available information. Filtering is done using the query. For some filter attributes, filtering for multiple options is supported by adding the `=` multiple times. E.g. `category_id=1&category_id=2`. ### Filtering on period For some resources, a period filter is available. This filter is used to get a subset of the available information within a certain period. The period filter is used by adding the `period_filter` query parameter to the endpoint. **Absolute periods** Absolute periods are defined by exact dates. The format is `YYYY(MM(DD))`. E.g. `2024` or `202402` or `20240227`. A different end date can be given by adding `..` and the end date. E.g. `202402..202403` for the period February 2024 to March 2024. **Relative periods** Relative periods are defined by a period in the past or future. Multiple formats are supported: - `today` - today's date - `yesterday` - yesterday's date - `tomorrow` - tomorrow's date - `(last/this/next)_(day/month/quarter/half_year/year)` - e.g. `last_month` or `next_year` or `this_quarter` - `last_x_days` - e.g. `last_7_days` or `last_14_days` ## Ordering Most list endpoints support ordering on one or more attributes. The order is defined using the `order=` parameter in the query part of the endpoint. Multiple columns can be used for ordering, delimited by a comma. E.g. `order=lastname,initials,first_name`. Each attribute used in the order parameter could be extended with a sort property `:`. E.g. `order=lastname:desc`. The following properties are supported throughout our API: - ```:asc``` ASC NULLS LAST (default) [comment]: (- ```:asc_nulls_last``` ASC NULLS LAST) [comment]: (- ```:asc_nulls_first``` ASC NULLS FIRST) - ```:desc``` DESC NULLS FIRST [comment]: (- ```:desc_nulls_last``` DESC NULLS LAST) [comment]: (- ```:desc_nulls_first``` DESC NULLS FIRST) ## Searching and location filtering For some resources a dedicated /search endpoint is available, which is optimized for searching large datasets. We use an Elasticsearch database to deliver these results. The schema for these resources is often a concise version of the schema used for regular endpoints, but always contains the primary key (obj_id). If you need the full schema for a resource found through /search, you can perform an additional call to the GET / endpoint. In most cases, searching has the following query parameters: - `term` - generic term used for the search - `city` or `zip` - a city name or postal code (only Dutch postal codes allowed) - `distance` - distance from the center of the given city or zip (default *5km*) Results from /search endpoints do not support custom ordering, but are ordered based on relevance (i.e. *score* for term queries and *distance* for all location bound search queries). ## Rate limiting Usage of the Congressus API is unlimited within the plan and permissions of the account you are using. To prevent fraud and abuse, requests to the API are throttled. You can request the API 60 times each minute and 1000 times per hour. The API will respond with a **429 Too many requests** response. This response contains the following fields in the headers: - `X-RateLimit-Limit` The total number of requests allowed for the active window - `X-RateLimit-Remaining` The number of requests remaining in the active window. - `X-RateLimit-Reset` UTC seconds since epoch when the window will be reset. - `Retry-After` Seconds to retry after when the Rate Limit will be reset. ## Cross-Origin Resource Sharing This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with W3C spec. This allows cross-domain communication from the browser. All responses have a wildcard same-origin, which allows to use our API from any domain or server. # Webhooks Information in a Congressus administration is constantly changing. If you want to perform actions based on these changes, webhooks help you to achieve this. Instead of querying the API at a certain interval, Congressus will notify you about changes to information in the administration. ## Usage Webhooks are useful in a broad range of situations. When the state of an resource changes, Congressus will perform a HTTP request to the URL you provide. Based on the payload of the request, you can determine which action you need to perform. How it works: - You need a URL that Congressus can call to deliver the payload. The Congressus servers must be able to access this URL. - You can add HTTP basic authentication or other token authentication in the URL, as long as the URL stays valid. - Your URL always needs to respond with a 200 HTTP status. Upon registration this is checked. - When your URL responds with another HTTP status code, Congressus will retry to deliver the call 10 times. The time interval between retries is gradually extended. - After each call, Congressus will store the last HTTP status code and HTTP body. Using the webhooks API, you can retrieve this information for debugging purposes. - You can register as many webhooks as required in an administration. Registration is done by sending a POST request to the webhooks API. > **We strongly recommend that you use a secure HTTPS endpoint for receiving payload from Congressus. If you use > unencrypted HTTP, anyone on the network may be able to listen in on sensitive information like members and invoices.** ## Webhook events Each webhook subscribes to an event. When an event occurs, Congressus will call the webhook using an HTTP request to the provided URL. The following events are available: **Members** - member - All member related events - member_added - Member added to the administration - member_updated - Existing Member is updated - member_deleted - Member is removed from the administration - member_birthday - Triggered once on the birthday of a member **Events** - event - All event related events - event_added - Event added - event_updated - Event updated - event_deleted - Event deleted from the administration **Event participations** - event_participation - All event participation related events - event_participation_added - Event participation added - event_participation_updated - Event participation updated - event_participation_deleted - Event participation deleted from the administration **Form entries** - form_entry - All form entry related events - form_entry_added - Form entry added - form_entry_updated - Form entry updated - form_entry_deleted - Form entry deleted from the administration **Sale invoices** - sale_invoices - All sale invoice related events - sale_invoices_added - Sale invoice added - sale_invoices_updated - Sale invoice updated - sale_invoices_deleted - Sale invoice deleted from the administration ## Payload Each webhook call has a payload based on the category of the event that triggered the webhook. E.g. events in the category **Members** get a payload based on the schema for Members, filled with the data for the resource that triggered the webhook. Each webhook call contains the following information: - `webhook_id`- The id of the webhook that triggered the call - `webhook_event` - The category of events for the webhook - `webhook_event_trigger` - The trigger that caused the webhook call - `created` - Date and time at which the webhook was triggered - `data` - List which contains the payload(s) in the form of the complete resource that triggered the event # Changelog This is version 3.0 of the Congressus API. In this chapter we describe all changes in v3.0. ## 2025-09-30 Endpoint for Filters added - A new endpoint `/filters` is added to retrieve available filters for Members, Events and Organisations. ## 2025-08-13 Filter on folder_id added to Storage - The `folder_id` parameter is added to the `storage` endpoint. This allows you to filter storage resources by folder. ## 2025-07-11 Website added to Magic link endpoint - The `website_id` parameter is added to the `magic-links` endpoint. This allows you to create magic links for a specific website. ## 2025-05-24 Organisation resource improvements - `Organisation` resources now also have the 'published' attribute. - `Organisation` resources now also include custom field data in the `custom_field_data` attribute. - Custom fields are defined per organisation category, so the custom fields available for an organisation depend on the category of the organisation. - `Organisation category` resources now also include metadata for the custom fields available for that category in the `custom_fields` attribute. ## 2025-05-04 Magic links added - `Magic links` are added to the API. These links can be used to authenticate a website visitor without the need for a password. ## 2024-11-25 Form and Form entry resources added - `Form` and `Form entry` resources are added to the API. - `Form` resources can be created and updated through the API. It is currently not possible to delete a form or manage fields and fieldsets. - `forms//entries` endpoint is available to retrieve form entries. - `forms//fields` endpoint is available to retrieve form fields. ## 2024-04-23 Custom fields for Members available in PUT/POST requests - Custom fields for Members can now be added or updated through the API. The custom fields are available in the `custom_field_data` attribute of the Member resource. - The old `custom_fields` attribute is deprecated and will be removed in a future version. - The `members/custom-fields` resource shows the available custom fields for Members, including meta information. ## 2024-02-27 Action endpoints for EventParticipation added - `EventParticipation` status can now be changed through the API, including fines when unsubscribing or declining a participation. - API upgrade guide from v20 to v30 removed from docs, as it is no longer relevant. The v20 API is unavailable since mid 2023. ## 2022-12-09 Event ticket types endpoints - `EventTicketType` resources can now be created, updated and deleted through the API - The context is now applied at row level according to the status of the Member for the `v30/members` endpoint ## 2022-06-28 Events updated, MembershipStatus resources added - `Event` resources are now fully operational, including the possibility to add participants / sell tickets through the API. - `MembershipStatus` is now available for Member resources. ## 2022-06-22 Minor updates and fixes - Feat: /members can be filtered against multiples statuses with the status_id query parameter (i.e: /members?status_id=2&status_id=3). - Feat: the News model now contains a list of websites where the news item is published on - Fix: add the default website to POST /news on create - Fix: sale_invoice_id is now honored when given by the creation of a sale invoice /sale-invoices//send ## 2022-06-03 Minor updates and fixes - Feat: Additional filtering for /sale-invoices endpoint added (invoice_type 'debit', 'is_credited' and 'is_not_credited'). - Feat: Renamed /groups/folders endpoints to /group-folders for more consistency. Deprecated old endpoints. - Feat: Added member status resources through /member-statuses. - Feat: Added profile_picture and formal_picture to Member resources. - Fix: we incorrectly used 'per_page' as parameter in the Pagination-section of these docs. The correct parameter is **'page_size'**. - Fix: all non-recursive endpoints for Group folders and Product folders returned children, this is resolved. ## 2022-05-03 Member validation through context added - Added extended validation options for Member-resources by setting a `context` parameter. This context ensures validation according to the field settings as set in Congressus Manager for the member status. - Description for Context validation added to the Member-resources. - Introduction on Context validation added to the [upgrade guide](#section/Upgrading-from-v20-to-v30) ## 2022-04-22 Upgrade guide from v20 to v30 added - First version for the [upgrade guide](#section/Upgrading-from-v20-to-v30) added ## 2022-03-23 Additional filtering for Group and Organisation resources - `Group` and `Group membership` resources can use a filter on member_id - `Organisation` and `Organisation membership` resources can use a filter on member_id ## 2022-03-21 Group and GroupFolder resources added - Group, GroupFolder and GroupMembership resources are added to the API. - `Group folders` are added and use a tree-like structure. - `Organisation` resources have create, update and delete views added. - `Organisation membership` resources are added - Fix: SDD mandates returned and empty list for Member resources. ## 2021-10-14 Organisation resources added - Both Organisation and Organisation category resources are added to the API. ## 2021-10-02 Additional filters added for Event participations - `Event participations` have additional filter functionality ## 2021-09-22 Added resources for Product folders and Sale invoice workflows - `Product folders` are added, using a tree-like structure. - `Sale invoice workflows` are added as resource. Read-only for this moment. - Updated descriptions for Sale invoice attributes. ## 2021-08-09 additional filters for events and products - Events can now be filtered on published true/false - Products can now be filtered on published and folder_id. More than one folder_id can be given by supplying it more than once as query param, e.g. `products?folder_id=123&folder_id=456` ## 2021-08-04 custom fields and descriptions added, publication options added to events and blogs - The retrieve member resource now also shows the custom field information for a member - Many attributes have an additional description added - Publication attributes are added to Event and Blog resources ## 2021-06-09 website related resources added - Website and Webpage resources added (list and get only) - News resources added - Default order is added for Websites, Webpages, Events and News list endpoints. You can overwrite the default order with the `order` query param - Improved descriptions for several resources, removed some typo's in the documentation ## 2021-04-06 initial release - This initial release contains a minor set of resources to work with.

Go to Download

Package to generate tables based upon response from API or by supplying key value pair manually.

Go to Download

# Introduction The Congressus API allows you to interact with your Congressus administration. The API is RESTful and uses JSON to transport information. This documentation aims to get you started with your first requests. Make sure to read this introduction completely to know all aspects of our API. ## REST basics A REST API describes the resources you can access in a clearly defined path structure. This documentation contains a reference for each resource in the API. Before you can use these resources, you need to know the basics of accessing the Congressus REST API. **Paths and versioning** The Congressus API resides on the following paths: https://api.congressus.nl/ `version` / `resource_path` ? `query_params` - The `version` part of the path indicates the version of the API you want to use. At this moment version v30 is the current version. By pointing to a specific version, we can make sure you always can expect equal behaviour from our API. - The `resource_path` part indicates the path of the resource you want to access. Specific paths to resources can be found in the API documentation. Examples of resource paths are: /members to retrieve all members or /member/ `obj_id` /statuses to create new member status for a member. - The `query_params` contains all filtering, ordering and pagination information. ## Authentication The current authentication flow present at Congressus API is by the use of the Bearer Token suggested by OAuth 2.0. To interact with the Congressus API, you must authenticate by supplying the header `Authorization` with the value `Bearer {access_token}`. **How do I get an API key?** You can create new apps and API keys in Congressus Manager through [this link](https://manager.congressus.nl/settings/integrations/apps). ## Requests There are different approaches for making requests to our API. The command line tool [curl](https://curl.se/) is easy and fast for testing our API. When you want to integrate the API into your own software, you can choose to use a general purpose REST library or to [create your own API client library](https://github.com/OpenAPITools/openapi-generator) based on our OpenAPI specs. ## Responses Congressus uses conventional HTTP response codes to indicate success or failure of an API request. In general, codes in the 2xx range indicate success, codes in the 4xx range indicate an error that resulted from the provided information (e.g. a required parameter was missing or input data was invalid), and codes in the 5xx range indicate an error with the Congressus API. ## Pagination Endpoints returning a list of entities, are paginated to prevent large responses. To control the pagination, you can use the `page` and `page_size` parameters. page determines which page to return (default: 1), page_size controls the amount of entities to return (default: 25, maximum: 100). Each paginated response contains the following information: - `has_prev` bool - `prev_num` int with previous page number - `has next` bool - `next_num` int with next page number - `data` list with results on current page - `total` int with total number of results ## Filtering Most list endpoints support filtering to get a subset of the available information. Filtering is done using the query. For some filter attributes, filtering for multiple options is supported by adding the `=` multiple times. E.g. `category_id=1&category_id=2`. ### Filtering on period For some resources, a period filter is available. This filter is used to get a subset of the available information within a certain period. The period filter is used by adding the `period_filter` query parameter to the endpoint. **Absolute periods** Absolute periods are defined by exact dates. The format is `YYYY(MM(DD))`. E.g. `2024` or `202402` or `20240227`. A different end date can be given by adding `..` and the end date. E.g. `202402..202403` for the period February 2024 to March 2024. **Relative periods** Relative periods are defined by a period in the past or future. Multiple formats are supported: - `today` - today's date - `yesterday` - yesterday's date - `tomorrow` - tomorrow's date - `(last/this/next)_(day/month/quarter/half_year/year)` - e.g. `last_month` or `next_year` or `this_quarter` - `last_x_days` - e.g. `last_7_days` or `last_14_days` ## Ordering Most list endpoints support ordering on one or more attributes. The order is defined using the `order=` parameter in the query part of the endpoint. Multiple columns can be used for ordering, delimited by a comma. E.g. `order=lastname,initials,first_name`. Each attribute used in the order parameter could be extended with a sort property `:`. E.g. `order=lastname:desc`. The following properties are supported throughout our API: - ```:asc``` ASC NULLS LAST (default) [comment]: (- ```:asc_nulls_last``` ASC NULLS LAST) [comment]: (- ```:asc_nulls_first``` ASC NULLS FIRST) - ```:desc``` DESC NULLS FIRST [comment]: (- ```:desc_nulls_last``` DESC NULLS LAST) [comment]: (- ```:desc_nulls_first``` DESC NULLS FIRST) ## Searching and location filtering For some resources a dedicated /search endpoint is available, which is optimized for searching large datasets. We use an Elasticsearch database to deliver these results. The schema for these resources is often a concise version of the schema used for regular endpoints, but always contains the primary key (obj_id). If you need the full schema for a resource found through /search, you can perform an additional call to the GET / endpoint. In most cases, searching has the following query parameters: - `term` - generic term used for the search - `city` or `zip` - a city name or postal code (only Dutch postal codes allowed) - `distance` - distance from the center of the given city or zip (default *5km*) Results from /search endpoints do not support custom ordering, but are ordered based on relevance (i.e. *score* for term queries and *distance* for all location bound search queries). ## Rate limiting Usage of the Congressus API is unlimited within the plan and permissions of the account you are using. To prevent fraud and abuse, requests to the API are throttled. You can request the API 60 times each minute and 1000 times per hour. The API will respond with a **429 Too many requests** response. This response contains the following fields in the headers: - `X-RateLimit-Limit` The total number of requests allowed for the active window - `X-RateLimit-Remaining` The number of requests remaining in the active window. - `X-RateLimit-Reset` UTC seconds since epoch when the window will be reset. - `Retry-After` Seconds to retry after when the Rate Limit will be reset. ## Cross-Origin Resource Sharing This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with W3C spec. This allows cross-domain communication from the browser. All responses have a wildcard same-origin, which allows to use our API from any domain or server. # Webhooks Information in a Congressus administration is constantly changing. If you want to perform actions based on these changes, webhooks help you to achieve this. Instead of querying the API at a certain interval, Congressus will notify you about changes to information in the administration. ## Usage Webhooks are useful in a broad range of situations. When the state of an resource changes, Congressus will perform a HTTP request to the URL you provide. Based on the payload of the request, you can determine which action you need to perform. How it works: - You need a URL that Congressus can call to deliver the payload. The Congressus servers must be able to access this URL. - You can add HTTP basic authentication or other token authentication in the URL, as long as the URL stays valid. - Your URL always needs to respond with a 200 HTTP status. Upon registration this is checked. - When your URL responds with another HTTP status code, Congressus will retry to deliver the call 10 times. The time interval between retries is gradually extended. - After each call, Congressus will store the last HTTP status code and HTTP body. Using the webhooks API, you can retrieve this information for debugging purposes. - You can register as many webhooks as required in an administration. Registration is done by sending a POST request to the webhooks API. > **We strongly recommend that you use a secure HTTPS endpoint for receiving payload from Congressus. If you use > unencrypted HTTP, anyone on the network may be able to listen in on sensitive information like members and invoices.** ## Webhook events Each webhook subscribes to an event. When an event occurs, Congressus will call the webhook using an HTTP request to the provided URL. The following events are available: **Members** - member - All member related events - member_added - Member added to the administration - member_updated - Existing Member is updated - member_deleted - Member is removed from the administration - member_birthday - Triggered once on the birthday of a member **Events** - event - All event related events - event_added - Event added - event_updated - Event updated - event_deleted - Event deleted from the administration **Event participations** - event_participation - All event participation related events - event_participation_added - Event participation added - event_participation_updated - Event participation updated - event_participation_deleted - Event participation deleted from the administration **Form entries** - form_entry - All form entry related events - form_entry_added - Form entry added - form_entry_updated - Form entry updated - form_entry_deleted - Form entry deleted from the administration **Sale invoices** - sale_invoices - All sale invoice related events - sale_invoices_added - Sale invoice added - sale_invoices_updated - Sale invoice updated - sale_invoices_deleted - Sale invoice deleted from the administration ## Payload Each webhook call has a payload based on the category of the event that triggered the webhook. E.g. events in the category **Members** get a payload based on the schema for Members, filled with the data for the resource that triggered the webhook. Each webhook call contains the following information: - `webhook_id`- The id of the webhook that triggered the call - `webhook_event` - The category of events for the webhook - `webhook_event_trigger` - The trigger that caused the webhook call - `created` - Date and time at which the webhook was triggered - `data` - List which contains the payload(s) in the form of the complete resource that triggered the event # Changelog This is version 3.0 of the Congressus API. In this chapter we describe all changes in v3.0. ## 2025-09-30 Endpoint for Filters added - A new endpoint `/filters` is added to retrieve available filters for Members, Events and Organisations. ## 2025-08-13 Filter on folder_id added to Storage - The `folder_id` parameter is added to the `storage` endpoint. This allows you to filter storage resources by folder. ## 2025-07-11 Website added to Magic link endpoint - The `website_id` parameter is added to the `magic-links` endpoint. This allows you to create magic links for a specific website. ## 2025-05-24 Organisation resource improvements - `Organisation` resources now also have the 'published' attribute. - `Organisation` resources now also include custom field data in the `custom_field_data` attribute. - Custom fields are defined per organisation category, so the custom fields available for an organisation depend on the category of the organisation. - `Organisation category` resources now also include metadata for the custom fields available for that category in the `custom_fields` attribute. ## 2025-05-04 Magic links added - `Magic links` are added to the API. These links can be used to authenticate a website visitor without the need for a password. ## 2024-11-25 Form and Form entry resources added - `Form` and `Form entry` resources are added to the API. - `Form` resources can be created and updated through the API. It is currently not possible to delete a form or manage fields and fieldsets. - `forms//entries` endpoint is available to retrieve form entries. - `forms//fields` endpoint is available to retrieve form fields. ## 2024-04-23 Custom fields for Members available in PUT/POST requests - Custom fields for Members can now be added or updated through the API. The custom fields are available in the `custom_field_data` attribute of the Member resource. - The old `custom_fields` attribute is deprecated and will be removed in a future version. - The `members/custom-fields` resource shows the available custom fields for Members, including meta information. ## 2024-02-27 Action endpoints for EventParticipation added - `EventParticipation` status can now be changed through the API, including fines when unsubscribing or declining a participation. - API upgrade guide from v20 to v30 removed from docs, as it is no longer relevant. The v20 API is unavailable since mid 2023. ## 2022-12-09 Event ticket types endpoints - `EventTicketType` resources can now be created, updated and deleted through the API - The context is now applied at row level according to the status of the Member for the `v30/members` endpoint ## 2022-06-28 Events updated, MembershipStatus resources added - `Event` resources are now fully operational, including the possibility to add participants / sell tickets through the API. - `MembershipStatus` is now available for Member resources. ## 2022-06-22 Minor updates and fixes - Feat: /members can be filtered against multiples statuses with the status_id query parameter (i.e: /members?status_id=2&status_id=3). - Feat: the News model now contains a list of websites where the news item is published on - Fix: add the default website to POST /news on create - Fix: sale_invoice_id is now honored when given by the creation of a sale invoice /sale-invoices//send ## 2022-06-03 Minor updates and fixes - Feat: Additional filtering for /sale-invoices endpoint added (invoice_type 'debit', 'is_credited' and 'is_not_credited'). - Feat: Renamed /groups/folders endpoints to /group-folders for more consistency. Deprecated old endpoints. - Feat: Added member status resources through /member-statuses. - Feat: Added profile_picture and formal_picture to Member resources. - Fix: we incorrectly used 'per_page' as parameter in the Pagination-section of these docs. The correct parameter is **'page_size'**. - Fix: all non-recursive endpoints for Group folders and Product folders returned children, this is resolved. ## 2022-05-03 Member validation through context added - Added extended validation options for Member-resources by setting a `context` parameter. This context ensures validation according to the field settings as set in Congressus Manager for the member status. - Description for Context validation added to the Member-resources. - Introduction on Context validation added to the [upgrade guide](#section/Upgrading-from-v20-to-v30) ## 2022-04-22 Upgrade guide from v20 to v30 added - First version for the [upgrade guide](#section/Upgrading-from-v20-to-v30) added ## 2022-03-23 Additional filtering for Group and Organisation resources - `Group` and `Group membership` resources can use a filter on member_id - `Organisation` and `Organisation membership` resources can use a filter on member_id ## 2022-03-21 Group and GroupFolder resources added - Group, GroupFolder and GroupMembership resources are added to the API. - `Group folders` are added and use a tree-like structure. - `Organisation` resources have create, update and delete views added. - `Organisation membership` resources are added - Fix: SDD mandates returned and empty list for Member resources. ## 2021-10-14 Organisation resources added - Both Organisation and Organisation category resources are added to the API. ## 2021-10-02 Additional filters added for Event participations - `Event participations` have additional filter functionality ## 2021-09-22 Added resources for Product folders and Sale invoice workflows - `Product folders` are added, using a tree-like structure. - `Sale invoice workflows` are added as resource. Read-only for this moment. - Updated descriptions for Sale invoice attributes. ## 2021-08-09 additional filters for events and products - Events can now be filtered on published true/false - Products can now be filtered on published and folder_id. More than one folder_id can be given by supplying it more than once as query param, e.g. `products?folder_id=123&folder_id=456` ## 2021-08-04 custom fields and descriptions added, publication options added to events and blogs - The retrieve member resource now also shows the custom field information for a member - Many attributes have an additional description added - Publication attributes are added to Event and Blog resources ## 2021-06-09 website related resources added - Website and Webpage resources added (list and get only) - News resources added - Default order is added for Websites, Webpages, Events and News list endpoints. You can overwrite the default order with the `order` query param - Improved descriptions for several resources, removed some typo's in the documentation ## 2021-04-06 initial release - This initial release contains a minor set of resources to work with.

Go to Download

The affixapi.com API documentation. # Introduction Affix API is an OAuth 2.1 application that allows developers to access customer data, without developers needing to manage or maintain integrations; or collect login credentials or API keys from users for these third party systems. # OAuth 2.1 Affix API follows the [OAuth 2.1 spec](https://datatracker.ietf.org/doc/html/draft-ietf-oauth-v2-1-08). As an OAuth application, Affix API handles not only both the collection of sensitive user credentials or API keys, but also builds and maintains the integrations with the providers, so you don't have to. # How to obtain an access token in order to get started, you must: - register a `client_id` - direct your user to the sign in flow (`https://connect.affixapi.com` [with the appropriate query parameters](https://github.com/affixapi/starter-kit/tree/master/connect)) - capture `authorization_code` we will send to your redirect URI after the sign in flow is complete and exchange that `authorization_code` for a Bearer token # Sandbox keys (xhr mode) ### dev ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q' \ 'https://dev.api.affixapi.com/2023-03-01/xhr/employees' ``` ### prod ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg' \ 'https://api.affixapi.com/2023-03-01/xhr/employees' ``` # Compression We support `brotli`, `gzip`, and `deflate` compression algorithms. To enable, pass the `Accept-Encoding` header with one or all of the values: `br`, `gzip`, `deflate`, or `identity` (no compression) In the response, you will receive the `Content-Encoding` response header indicating the compression algorithm used in the data payload to enable you to decompress the result. If the `Accept-Encoding: identity` header was passed, no `Content-Encoding` response header is sent back, as no compression algorithm was used. # Webhooks An exciting feature for HR/Payroll modes are webhooks. If enabled, your `webhook_uri` is set on your `client_id` for the respective environment: `dev | prod` Webhooks are configured to make live requests to the underlying integration 1x/hr, and if a difference is detected since the last request, we will send a request to your `webhook_uri` with this shape: ``` { added: [ { ..., date_of_birth: '2010-08-06', display_full_name: 'Daija Rogahn', employee_number: '57993', employment_status: 'pending', employment_type: 'other', employments: [ { currency: 'eur', effective_date: '2022-02-25', employment_type: 'other', job_title: 'Dynamic Implementation Manager', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 96000, }, ], first_name: 'Daija', ... } ], removed: [], updated: [ { ..., date_of_birth: '2009-11-09', display_full_name: 'Lourdes Stiedemann', employee_number: '63189', employment_status: 'leave', employment_type: 'full_time', employments: [ { currency: 'gbp', effective_date: '2023-01-16', employment_type: 'full_time', job_title: 'Forward Brand Planner', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 86000, }, ], first_name: 'Lourdes', } ] } ``` the following headers will be sent with webhook requests: ``` x-affix-api-signature: ab8474e609db95d5df3adc39ea3add7a7544bd215c5c520a30a650ae93a2fba7 x-affix-api-origin: webhooks-employees-webhook user-agent: affixapi.com ``` Before trusting the payload, you should sign the payload and verify the signature matches the signature sent by the `affixapi.com` service. This secures that the data sent to your `webhook_uri` is from the `affixapi.com` server. The signature is created by combining the signing secret (your `client_secret`) with the body of the request sent using a standard HMAC-SHA256 keyed hash. The signature can be created via: - create an `HMAC` with your `client_secret` - update the `HMAC` with the payload - get the hex digest -> this is the signature Sample `typescript` code that follows this recipe: ``` import { createHmac } from 'crypto'; export const computeSignature = ({ str, signingSecret, }: { signingSecret: string; str: string; }): string => { const hmac = createHmac('sha256', signingSecret); hmac.update(str); const signature = hmac.digest('hex'); return signature; }; ``` While verifying the Affix API signature header should be your primary method of confirming validity, you can also whitelist our outbound webhook static IP addresses. ``` dev: - 52.210.169.82 - 52.210.38.77 - 3.248.135.204 prod: - 52.51.160.102 - 54.220.83.244 - 3.254.213.171 ``` ## Rate limits Open endpoints (not gated by an API key) (applied at endpoint level): - 15 requests every 1 minute (by IP address) - 25 requests every 5 minutes (by IP address) Gated endpoints (require an API key) (applied at endpoint level): - 40 requests every 1 minute (by IP address) - 40 requests every 5 minutes (by `client_id`) Things to keep in mind: - Open endpoints (not gated by an API key) will likely be called by your users, not you, so rate limits generally would not apply to you. - As a developer, rate limits are applied at the endpoint granularity. - For example, say the rate limits below are 10 requests per minute by ip. from that same ip, within 1 minute, you get: - 10 requests per minute on `/orders`, - another 10 requests per minute on `/items`, - and another 10 requests per minute on `/identity`, - for a total of 30 requests per minute.

Go to Download

A simple response code enum library

Go to Download

A Symfony bundle for Twitch API response objects, enums, and signature verification

Go to Download