Libraries tagged by order id
iddqdby/f7
24 Downloads
Functional library for PHP 7.
zaazsoft/module-qrcode
6 Downloads
QR code of order id in order view page frontend
nogrod/tyre24-seller-php-sdk
5 Downloads
## API Versioning We're constantly updating and improving the API, and while we try to ensure backwards compatibility, there's always a chance that we'll introduce a change that affects the way your app works. To get around any problems that this might cause, we recommend that you include the Accept header with every API request that you make. This header enables you to target your request to a particular version of the API. It looks like this in HTTP: ```text Accept: application/vnd.saitowag.api+json;version={version_number} ``` Normally, you set the value of the placeholder to the current version of the API. But if you're troubleshooting your app, and you know that an older version of the API works perfectly, say version 1.0, you'd substitute 1.0 for the placeholder value. The API then handles the request as if it were for version 1.0, and your app goes back to working properly. ### Example of an error with invalid `ACCEPT` header. The `HTTP status code` in case of an invalid `ACCEPT` header will be `400 Bad Request` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_ACCEPT_HEADER_NOT_VALID", "error_message": "Accept header is not valid or not set." } ] } ``` ### Unexpected Error If an unexpected error occours, a so called Error General will be returned. The `HTTP status code` in case of an invalid `ACCEPT` header will be `500` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_GENERAL", "error_message": "An unexpected error has occurred. If this problem persists, please contact our support." } ] } ``` ### Invalid Endpoint Error Any call to a non-existing API endpoint (i.e. wrong route) will return a response with `HTTP status code` `404` and the following response body: ```json { "data": [ { "error_code": "ERR_GENERAL_INVALID_ENDPOINT", "error_message": "The requested endpoint does not exist." } ] } ``` Please, note that this error is returned also when a request parameter, part of a valid route, is not well formed. For example, a call to a route that contains a wrong order id (i.e. it does not meet the accepted order id pattern - e.g. 123456789PAC instead of PAC123456789) will return the error just mentioned, as the route is considered as badly formed. In conclusion, please pay special attention to all those routes that have request parameters with specific pattern requirements. ### Shipping Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | Standard `Standard` | | 2 | Self-collection `Selbstabholung` | | 3 | Express morning (truck) `Express-Morgen (LKW)` | | 4 | Express Today (Truck) `Express-Heute (LKW)` | | 5 | Express morning (package forwarding) `Express-Morgen (Packet Spedition)` | | 7 | Express-now | ### Payment Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | SEPA Direct Debit `SEPA-Lastschrift` | | 2 | Prepayment `Vorkasse` | | 3 | Cash on delivery `Nachnahme` | | 4 | PayPal/Credit Card `PayPal/Kreditkarte` | | 5 | open payment method `offene Zahlungsart` | | 7 | Invoice(8 days payment term) `Rechnung(8 Tage Zahlungsziel)` | | 8 | open payment method (SEPA) `offene Zahlungsart (SEPA)` | ## Query String Filters Query String Filters | Operator | Full Name | Description | Example | | ------ | ------ | ------ | ------ | | eq | Equal | Used to narrow down the result of a query to some specific value, for specified field. It adds the "**=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=eq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} = 11` | integer: `{url}?filter[id]=eq;21`float: `{url}?filter[average]=eq;3.7`string: `{url}?filter[free_text]=eq;apple`Date: `{url}?filter[birthday]=eq;2020-06-03`DateTime: `{url}?filter[created_at]=eq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=eq;1` | | neq | Not equal | Used to exclude the value from a query result. It adds the "****" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=neq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} 11` | integer: `{url}?filter[id]=neq;21`float: `{url}?filter[average]=neq;3.7`string: `{url}?filter[free_text]=neq;apple`Date: `{url}?filter[birthday]=neq;2020-06-03`DateTime: `{url}?filter[created_at]=neq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=neq;1` | | gt | Greater than | Used to reduce fetched values to those greater than the one provided in a query string. It adds the "**>**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gt;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} > 11` | integer: `{url}?filter[id]=gt;21`float: `{url}?filter[average]=gt;3.7`Date: `{url}?filter[birthday]=gt;2020-06-03`DateTime: `{url}?filter[created_at]=gt;2020-06-03 14:32:32` | | gte | Greater than or equal | Used to reduce fetched values to those greater than or equal to the one provided in a query string. It adds the "**>=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gte;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} >= 11` | integer: `{url}?filter[id]=gte;21`float: `{url}?filter[average]=gte;3.7`Date: `{url}?filter[birthday]=gte;2020-06-03`DateTime: `{url}?filter[created_at]=gte;2020-06-03 14:32:32` | | lt | Less than | Used to reduce fetched values to those less than provided in a query string. It adds the "**
nogrod/tyre24-common-php-sdk
3 Downloads
## API Versioning We're constantly updating and improving the API, and while we try to ensure backwards compatibility, there's always a chance that we'll introduce a change that affects the way your app works. To get around any problems that this might cause, we recommend that you include the Accept header with every API request that you make. This header enables you to target your request to a particular version of the API. It looks like this in HTTP: ```text Accept: application/vnd.saitowag.api+json;version={version_number} ``` Normally, you set the value of the placeholder to the current version of the API. But if you're troubleshooting your app, and you know that an older version of the API works perfectly, say version 1.0, you'd substitute 1.0 for the placeholder value. The API then handles the request as if it were for version 1.0, and your app goes back to working properly. ### Example of an error with invalid `ACCEPT` header. The `HTTP status code` in case of an invalid `ACCEPT` header will be `400 Bad Request` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_ACCEPT_HEADER_NOT_VALID", "error_message": "Accept header is not valid or not set." } ] } ``` ### Unexpected Error If an unexpected error occours, a so called Error General will be returned. The `HTTP status code` in case of an invalid `ACCEPT` header will be `500` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_GENERAL", "error_message": "An unexpected error has occurred. If this problem persists, please contact our support." } ] } ``` ### Invalid Endpoint Error Any call to a non-existing API endpoint (i.e. wrong route) will return a response with `HTTP status code` `404` and the following response body: ```json { "data": [ { "error_code": "ERR_GENERAL_INVALID_ENDPOINT", "error_message": "The requested endpoint does not exist." } ] } ``` Please, note that this error is returned also when a request parameter, part of a valid route, is not well formed. For example, a call to a route that contains a wrong order id (i.e. it does not meet the accepted order id pattern - e.g. 123456789PAC instead of PAC123456789) will return the error just mentioned, as the route is considered as badly formed. In conclusion, please pay special attention to all those routes that have request parameters with specific pattern requirements. ### Shipping Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | Standard `Standard` | | 2 | Self-collection `Selbstabholung` | | 3 | Express morning (truck) `Express-Morgen (LKW)` | | 4 | Express Today (Truck) `Express-Heute (LKW)` | | 5 | Express morning (package forwarding) `Express-Morgen (Packet Spedition)` | | 7 | Express-now | ### Payment Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | SEPA Direct Debit `SEPA-Lastschrift` | | 2 | Prepayment `Vorkasse` | | 3 | Cash on delivery `Nachnahme` | | 4 | PayPal/Credit Card `PayPal/Kreditkarte` | | 5 | open payment method `offene Zahlungsart` | | 7 | Invoice(8 days payment term) `Rechnung(8 Tage Zahlungsziel)` | | 8 | open payment method (SEPA) `offene Zahlungsart (SEPA)` | ## Query String Filters Query String Filters | Operator | Full Name | Description | Example | | ------ | ------ | ------ | ------ | | eq | Equal | Used to narrow down the result of a query to some specific value, for specified field. It adds the "**=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=eq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} = 11` | integer: `{url}?filter[id]=eq;21`float: `{url}?filter[average]=eq;3.7`string: `{url}?filter[free_text]=eq;apple`Date: `{url}?filter[birthday]=eq;2020-06-03`DateTime: `{url}?filter[created_at]=eq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=eq;1` | | neq | Not equal | Used to exclude the value from a query result. It adds the "****" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=neq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} 11` | integer: `{url}?filter[id]=neq;21`float: `{url}?filter[average]=neq;3.7`string: `{url}?filter[free_text]=neq;apple`Date: `{url}?filter[birthday]=neq;2020-06-03`DateTime: `{url}?filter[created_at]=neq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=neq;1` | | gt | Greater than | Used to reduce fetched values to those greater than the one provided in a query string. It adds the "**>**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gt;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} > 11` | integer: `{url}?filter[id]=gt;21`float: `{url}?filter[average]=gt;3.7`Date: `{url}?filter[birthday]=gt;2020-06-03`DateTime: `{url}?filter[created_at]=gt;2020-06-03 14:32:32` | | gte | Greater than or equal | Used to reduce fetched values to those greater than or equal to the one provided in a query string. It adds the "**>=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gte;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} >= 11` | integer: `{url}?filter[id]=gte;21`float: `{url}?filter[average]=gte;3.7`Date: `{url}?filter[birthday]=gte;2020-06-03`DateTime: `{url}?filter[created_at]=gte;2020-06-03 14:32:32` | | lt | Less than | Used to reduce fetched values to those less than provided in a query string. It adds the "**
razorisuru/shopping-cart
9 Downloads
The ShoppingCart package provides a simple and flexible solution for managing a shopping cart in Laravel applications. It uses sessions to store cart items, allowing you to easily add, update, remove, and clear items. With support for custom attributes, price calculations, and total cost computation, this package is ideal for building e-commerce and order management systems.
liagkos/laravel-grvatid-validator
9 Downloads
Validator for Laravel in order to check if a number is POTENTIALLY valid in Greek VAT ID Registry
kruegge82/weclapp
5 Downloads
# Getting Started API Version: [v1](v1.html) The weclapp REST API lets you integrate weclapp with other applications or services. The specification for this version can be downloaded here: | Format | Public | |---------------------------------|----------------------------------------------------------------------------------| | swagger JSON | Download | | OpenApi 3 JSON | Download | | OpenApi 3 YAML (with user docs) | Download | ## What should I know before starting? Our API is continuously being developed and improved, but we are still trying to keep it as stable as possible. We try to only have changes that are backwards compatible: usually the changes are only additions, e.g. new resources are implemented or new properties are added to existing resources. Sometimes breaking changes cannot be avoided, e.g. when a new feature requires an incompatible change to the underlying data model, all those changes will be documented in the change log. ## Security and Authentication You must be a verified user to make API requests. You can authorize against the API with an API token. The token is configurable in your weclapp account under **My settings > API**. Authentication is possible in multiple ways: If the request contains the session cookies of a logged in weclapp session then the user and permissions of that session are used. This is useful when testing the API in a web browser, because then requests are “automatically” authenticated if weclapp is used in another tab. But generally the API is not used from a browser or with session cookies, instead there is an API token for each user that can be used to authenticate requests. Each user can find his/her token on the "My Settings page". The token should be kept secret like a password. A user can also generate a new token at any time, doing that invalidates all previous tokens. Authenticating using a token is possible in two ways: * the token can be sent using the AuthenticationToken header `AuthenticationToken: {api_token}` * the standard HTTP Basic authentication can be used: the username needs to be `“*”` and the password is the token ## Using curl ```bash curl --compressed -H "AuthenticationToken:{api_token}" "https://.weclapp.com/webapp/api/v2" ... ``` Examples of how to use curl will be shown in each section of this API. ## Headers This is a JSON-only API. You must supply a `Content-Type: application/json` header on PUT and POST operations. You must set a `Accept: application/json` header on all requests. You may get a `text/plain` response in case of error, e.g. in case of a bad request, you should treat this as an error you need to take action on. To reduce traffic the weclapp API works with [compression](https://developer.mozilla.org/en-US/docs/Web/HTTP/Compression#end-to-end_compression). This means, a client should always submit the header “Accept-Encoding: gzip”. If this header is not set, the API will enforce compression and respond with "Content-Encoding: gzip". Please also make sure to set a `User-Agent` header for all automated requests, as that makes it much easier to identify misbehaving clients. ## URLs The base URL for the API is `https://.weclapp.com/webapp/api/v2/` where `.weclapp.com` is the domain of the specific weclapp instance. So each weclapp instance has its own API endpoints which allow accessing data for that particular instance. The API provides access to various resources like customers, sales orders, articles etc.. Each of those resources implements a common set of operations. The URLs and HTTP methods for the different resource operations use the same pattern for all resources: | Operation | HTTP Method | URL pattern | |-------------------------------|-------------|-----------------------------------------------------------------------| | Query/list instances | GET | `https://.weclapp.com/webapp/api/v2/` | | total number of instances | GET | `https://.weclapp.com/webapp/api/v2//count` | | Get a specific instance by id | GET | `https://.weclapp.com/webapp/api/v2//id/` | | Create a new instance | POST | `https://.weclapp.com/webapp/api/v2/` | | Update a specific instance | PUT | `https://.weclapp.com/webapp/api/v2//id/` | | Delete a specific instance | DELETE | `https://.weclapp.com/webapp/api/v2//id/` | Not all resources support all of those operations. A general description for each operation can be found in API operations by example, and details for each resource are described on the page for that resource. ## Additional operations Some resources allow further operations or actions. Those operations can be executed with a POST request, for some operations that only read data it is also possible to use a GET request (this is documented for each operation). For general operations for a resource the URL pattern is `https://.weclapp.com/webapp/api/v2//`. Some operations are instance specific, those use the following URL pattern: `https://.weclapp.com/webapp/api/v2//id//`. ## JSON | Type | Representation in JSON | |----------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | string | Serialized as JSON string, empty strings (length 0 or only whitespace) are always interpreted as null, it is not possible to have a property with an empty string value. | | boolean | Serialized as `true` / `false`. | | decimal number | Most numbers in weclapp are decimal numbers with a fixed precision and scale (e.g. quantities or prices), they are serialized as JSON strings and not as JSON numbers to prevent accidental loss of precision when the JSON is deserialized with a JSON library that uses doubles to represent JSON numbers. The serialized numbers always use a “.” as the decimal mark (if one is required). | | integers | Integer numbers (that can safely be represented as a double) are serialized as JSON numbers. | | floats/doubles | Serialized as JSON numbers. | | dates and timestamps | Serialized as the milliseconds since 1970-01-01T00:00:00Z (as a JSON number). | | enums | Sometimes a property value can be one of a fixed number of named options. Those enum properties are serialized as a JSON string with the name of the option. | The deserialization of data sent to the API is relatively lenient, for example when a string is expected, but a number is given then that number is used as the string and the other way around (if possible). Properties with the value null are not serialized by default and when sending data to the API it is also not necessary to include properties whose value is null: all properties that are missing from the JSON object but are expected are assumed to be `null`. To get all properties including those with the value null the query parameter `serializeNulls` can be added to the request URL, in that case null values are included in the response. ## Error Responses Any request on the weclapp API may return an error response, with a structure conforming to [RFC 7807](https://datatracker.ietf.org/doc/html/rfc7807). See the [API error reference](#errors) section for details. ## Change Policy weclapp may modify the attributes and resources available to the API and our policies related to access and use of the API from time to time without advance notice. weclapp will use commercially reasonable efforts to notify you of any modifications to the API or policies through notifications or posts on the weclapp Developer Website. weclapp also tracks deprecation of attributes of the API on its Changelog. Modification of the API may have an adverse effect on weclapp Applications, including but not limited to changing the manner in which weclapp Applications communicate with the API and display or transmit Your Data. weclapp will not be liable to you or any third party for such modifications or any adverse effects resulting from such modifications # API newsletter Sign up here for our [API newsletter](https://340d89eb.sibforms.com/serve/MUIEAEREP3buQMWpwPwuVohmsPBikdVQIilNQeZ2DJBE5NZePFYqyp_62WSheCC5t_Q7eJ6SVpZBauqRY93L8L8Iquik5gaH40Bi0uOtPioS7U7k4JvemqVuSdvEV0A3DgygC5LOAv-kjuN4Ij5MUqzm5DSHYbmKvGucHMXpZMFGGA5Lwi5VUv6ZZbROGqZJCrGfYFxGttzVBqc_). We will inform you regularly about planned API changes. # API operations sample As mentioned previously all resources implement common operations in the same way. In the following all the common operations are explained for the `customer` resource. The operations work in the same way for all other resources (some resources don’t support all the operations), the differences between the resources are mostly the data and the properties that are required and used. ## Querying The most common operation is querying or listing the existing entity instances. This is possible with a `GET` request to the base URL of a resource: ### `GET /customer` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer" ``` **Output:** ```json { "result": [ { "id": "4342", "version": "1", "addresses": [ { "id": "4344", "version": "0", "city": "München", "countryCode": "DE", "createdDate": 1496828973904, "deliveryAddress": false, "invoiceAddress": false, "lastModifiedDate": 1496828973903, "primeAddress": true, "street1": "Mustergasse 7", "zipcode": "80331 " } ], "blocked": false, "company": "Muster GmbH", "contacts": [ { "id": "4332", "version": "1", "addresses": [ { "id": "4334", "version": "0", "city": "München", "countryCode": "DE", "createdDate": 1496828882836, "deliveryAddress": false, "invoiceAddress": false, "lastModifiedDate": 1496828882836, "primeAddress": true, "street1": "Fasanenweg 15", "zipcode": "80331" } ], "createdDate": 1496828882837, "email": "[email protected]", "firstName": "Max", "lastModifiedDate": 1496828996245, "lastName": "Mustermann", "partyType": "PERSON", "personCompany": "Muster GmbH", "salutation": "MR" } ], "createdDate": 1496828973904, "currencyId": "248", "currencyName": "EUR", "customAttributes": [ { "attributeDefinitionId": "4048" } ], "customerNumber": "C1006", "customerTopics": [], "deliveryBlock": false, "insolvent": false, "insured": false, "lastModifiedDate": 1496828996212, "optIn": false, "partyType": "ORGANIZATION", "responsibleUserFixed": false, "responsibleUserId": "947", "responsibleUserUsername": "[email protected]", "salesChannel": "NET1", "useCustomsTariffNumber": false } ] } ``` In this case there is one sales order with one order item. By default, all null values are omitted, to include them the query parameter serializeNulls can be used: ### `GET /customer?serializeNulls` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?serializeNulls" ``` **Output:** ```json { "result": [ { "id": "4342", "version": "1", "addresses": [ { "id": "4344", "version": "0", "city": "München", "company": null, "company2": null, "countryCode": "DE", "createdDate": 1496828973904, "deliveryAddress": false, "globalLocationNumber": null, "invoiceAddress": false, "lastModifiedDate": 1496828973903, "postOfficeBoxCity": null, "postOfficeBoxNumber": null, "postOfficeBoxZipCode": null, "primeAddress": true, "state": null, "street1": "Mustergasse 7", "street2": null, "zipcode": "80331 " } ], "amountInsured": null, "annualRevenue": null, "birthDate": null, "blockNotice": null, "blocked": false, "commercialLanguageId": null, "company": "Muster GmbH", "company2": null, "contacts": [ { "id": "4332", "version": "1", "addresses": [ { "id": "4334", "version": "0", "city": "München", "company": null, "company2": null, "countryCode": "DE", "createdDate": 1496828882836, "deliveryAddress": false, "globalLocationNumber": null, "invoiceAddress": false, "lastModifiedDate": 1496828882836, "postOfficeBoxCity": null, "postOfficeBoxNumber": null, "postOfficeBoxZipCode": null, "primeAddress": true, "state": null, "street1": "Fasanenweg 15", "street2": null, "zipcode": "80331" } ], "birthDate": null, "company": null, "company2": null, "createdDate": 1496828882837, "customAttributes": null, "description": null, "email": "[email protected]", "fax": null, "firstName": "Max", "fixPhone2": null, "lastModifiedDate": 1496828996245, "lastName": "Mustermann", "middleName": null, "mobilePhone1": null, "mobilePhone2": null, "partyType": "PERSON", "personCompany": "Muster GmbH", "personDepartment": null, "personRole": null, "phone": null, "phoneHome": null, "salutation": "MR", "title": null, "website": null } ], "createdDate": 1496828973904, "creditLimit": null, "currencyId": "248", "currencyName": "EUR", "customAttributes": [ { "attributeDefinitionId": "4048", "booleanValue": null, "dateValue": null, "numberValue": null, "selectedValueId": null, "selectedValues": null, "stringValue": null } ], "customerCategoryId": null, "customerCategoryName": null, "customerNumber": "C1006", "customerRating": null, "customerTopics": [], "defaultHeaderDiscount": null, "defaultHeaderSurcharge": null, "deliveryBlock": false, "description": null, "email": null, "fax": null, "firstName": null, "insolvent": false, "insured": false, "invoiceContactId": null, "lastModifiedDate": 1496828996212, "lastName": null, "leadSourceId": null, "leadSourceName": null, "middleName": null, "mobilePhone1": null, "oldCustomerNumber": null, "optIn": false, "parentPartyId": null, "partyType": "ORGANIZATION", "paymentMethodId": null, "paymentMethodName": null, "personCompany": null, "personDepartment": null, "personRole": null, "phone": null, "primaryContactId": null, "responsibleUserFixed": false, "responsibleUserId": "947", "responsibleUserUsername": "[email protected]", "salesChannel": "NET1", "salutation": null, "satisfaction": null, "sectorId": null, "sectorName": null, "shipmentMethodId": null, "shipmentMethodName": null, "termOfPaymentId": null, "termOfPaymentName": null, "title": null, "useCustomsTariffNumber": false, "vatRegistrationNumber": null, "website": null } ] } ``` ## Pagination By default the operation will not return all entity instances but only the first 100, this can be changed by using the `pageSize` query parameter with the number of desired results. But `pageSize` cannot be arbitrarily high it is usually limited 1000 (exceptions to the default limits of 100 and 1000 are noted in the documentation for the specific resources). To get further results it is necessary to skip entity instances, this is done using the `page` query parameter. Examples: ### `GET /customer?pageSize=10` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?pageSize=10" ``` returns at most 10 instances ### `GET /customer?page=2&pageSize=10` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?page=2&pageSize=10" ``` returns the second page of results (the `page` parameter is one based, so `page=1` is the first page, which is also the default). Using those two parameters it is possible to implement pagination. ## Sorting It is also possible to change the order of the returned results using the `sort` parameter: ### `GET /customer?sort=lastModifiedDate` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?sort=lastModifiedDate" ``` sort by `lastModifiedDate` (ascending). ### `GET /customer?sort=-lastModifiedDate` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?sort=-lastModifiedDate" ``` sort by `lastModifiedDate` descending. ### `GET /customer?sort=lastModifiedDate,-salesChannel` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?sort=lastModifiedDate,-salesChannel" ``` sort by `lastModifiedDate` (ascending) and then `salesChannel` descending. It is generally possible to sort by most of the simple properties of an entity. It is possible to combine multiple sort orders by combining the property names with a comma. To sort in descending order just prepend a minus to the property name. If an unsupported or unknown property is specified then an error response is returned. ## Filtering It is often desired to get just a subset of the data, for example just the orders of a specific customer or created after a specific date. This is possible using filtering query parameters: ### `GET /customer?salesChannel-eq=NET1` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?salesChannel-eq=NET1" ``` customers for `salesChannel` `NET1`. ### `GET /customer?createdDate-gt=1398436281262` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?createdDate-gt=1398436281262" ``` customers created after the specified timestamp. ### `GET /customer?salesChannel-eq=NET1&createdDate-gt=1398436281262` ```bash curl --compressed -H "AuthenticationToken:" \ "https://.weclapp.com/webapp/api/v2/customer?salesChannel-eq=NET1&createdDate-gt=1398436281262" ``` customers for `salesChannel` `NET1` and created after the specified timestamp. ### `GET /customer?customAttribute4587-eq=NEW` ```bash curl --compressed -H """AuthenticationToken:" \ "https://.weclapp.com/webapp/api/v2/customer?customAttribute4587-eq=NEW" ``` customers with the value `NEW` for `customAttribute` with id 4587. ### `GET /customer?customAttribute4587.entityReferences.entityId-eq=1234` ```bash curl --compressed -H "AuthenticationToken:" "https://.weclapp.com/webapp/api/v2/customer?customAttribute4587.entityReferences.entityId-eq=1234" ``` customers with an entity reference to an entity with the id 1234 for the `customAttribute` with the id 4587. ### `GET /customAttributeDefinitions` All attributeTypes are supported except `MULTISELECT_LIST`. CustomAttributes of attributeType `LIST` could be filtered by `customAttribute{customAttributeId}.id` or `customAttribute{customAttributeId}.value`. ### `GET /customer?customAttribute3387.value-eq=OPTION1` ```bash curl --compressed -H "AuthenticationToken:" \ "https://.weclapp.com/webapp/api/v2/customer?customAttribute3387.value-eq=OPTION1" ``` customers with value `OPTION1` for `customAttribute` with id 3387. A filtering query parameter consists of a property name and a filter operator joined together with a minus. If multiple filtering query parameter are specified then they are combined and the returned results match all of them. Filtering query parameters for unknown properties or properties that don’t support filtering are silently ignored. The following filtering operators are supported (not all of them work for all property types): | Operator | Meaning | |----------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | eq | equal | | ne | not equal | | lt | less than | | gt | greater than | | le | less equal | | ge | greater equal | | null | property is null (the query parameter value is ignored and can be omitted) | | notnull | property is not null (the query parameter value is ignored and can be omitted) | | like | like expression (supports `%` and `_` as placeholders, similar to SQL LIKE) | | notlike | not like expression | | ilike | like expression, ignoring case | | notilike | not like expression, ignoring case | | in | the property value is in the specified list of values, the query parameter value must be a JSON array with the values in the correct type, for example `?customerNumber-in=["1006","1007"]` | | notin | the property value is not in the specified list of values | ## "Or" condition filtering In addition to the default behavior of linking filter expressions via "and" you can also link individual filter expressions via "or" by prefixing their parameter name with "or-": ### `GET /customer?or-name-eq=charlie&or-name-eq=chaplin` ```bash curl --compressed -H "AuthenticationToken:" \ "https://.weclapp.com/webapp/api/v2/customer?or-name-eq=charlie&or-name-eq=chaplin" ``` The above example is the equivalent of the expression `(name equals "charlie") or (name equals "chaplin")` For combining `or` and `and` clauses you may also group `or` expressions by using `or-` instead of the plain `or-` prefix: ### `GET /customer?orGroup1-name-eq=charlie&orGroup1-name-eq=chaplin&orGroup2-responsibleUserUsername-eq=mrtest&orGroup2-referenceNumber=4711&commercialLanguageId-eq=12` ```bash curl --compressed -H "AuthenticationToken:" \ "https://.weclapp.com/webapp/api/v2/customer?orGroup1-name-eq=charlie&orGroup1-name-eq=chaplin&orGroup2-responsibleUserUsername-eq=mrtest&orGroup2-referenceNumber=4711&commercialLanguageId-eq=12" ``` The above example is the equivalent of the expression ``` ((name equals charlie) or (name equals chaplin)) and ((responsibleUserUsername equals "mrtest") or (referenceNumber equals "4711")) and (commercialLanguageId equals "12") ``` Technically, the default "or-" variant is just a special case of this, using the empty String as group name. ## Filter Expressions **Warning: This is still a beta feature.** In addition to individual filter properties it is also possible to specify complex filter expressions that can combine multiple conditions and express relations between properties. Example: ```bash curl --compressed -H "AuthenticationToken:" \ https://.weclapp.com/webapp/api/v2/party \ --get \ --data-urlencode 'filter=(lower(contacts.firstName + " " + contacts.lastName) = "Ertan Özdil") and (lastModifiedDate >= "2022-01-01T00:00:00Z")' ``` * "filter" parameters are ANDed with other filter parameters * Property references in filter expressions have exactly the same form and semantics as for the individual filter parameters. * Multiple "filter" parameters may be used if needed. ### Examples Some more example filter expressions: ```sql -- enum literals are specified as string literals (salesChannel in ["NET1", "NET4", "NET5"]) and (partyType = "ORGANIZATION") -- normal arithmetic operations are supported. (unitPrice + unitPrice * salesTax)
kruegge82/jtlffn
2 Downloads
# Introduction JTL-FFN is a standardized interface for fulfillment service providers and their customers. Fulfiller can offer their services to merchants and merchants can respectively choose from a wide range of service providers according to their needs. ## The ecosystem The FFN network consists of this REST API, an online portal and third party integrations (JTL-Wawi being one of them). The REST API orchestrates the interactions between the participants and the portal website provides services by JTL (such as managing and certifying warehouses of a fulfiller and merchants searching for their service providers). ## About this API The base url of this api is [https://ffn2.api.jtl-software.com/api](https://ffn2.api.jtl-software.com/api). This API (and this documentation) consists of three parts: * Fulfiller API - operations used when acting as a fulfiller in the network. Only users with the role `Fulfiller` can access these endpoints. * Merchant API - operations used when acting as a merchant in the network. Only users with the role `Merchant` can access these endpoints. * Shared API - operations available to all users. Please use the navigation menu at the top to switch between the documentation for the different APIs. # OAuth The FFN-API uses [OAuth2](https://tools.ietf.org/html/rfc6749) with the [Authorization Code Grant](https://tools.ietf.org/html/rfc6749#section-4.1) for its endpoints. Users must have an active [JTL customer center](https://kundencenter.jtl-software.de) account to authorize against the OAuth2 server. Applications and services using the API must acquire client credentials from JTL. ## Application credentials When making calls against the API, you need to do it in the context of an application. You will get the credentials for your application from JTL. Application credentials consist of the following: * `client_id` - uniquely identifies your application * `client_secret` - secret used to authenticate your application * `callback_uri` - the uri the OAuth2 server redirect to on authorization requests ## Requesting authorization When you want to authorize a user you redirect him to `https://oauth2.api.jtl-software.com/authorize` with the following query string parameters: * `response_type` - Must be set to "code" for the [Authorization Code Grant](https://tools.ietf.org/html/rfc6749#section-4.1). * `redirect_uri` - After the user accepts your authorization request this is the url that will be redirected to. It must match the `callback_uri` in your client credentials. * `client_id` - Your applications identifier from your application credentials. * `scope` - The scopes you wish to authorize (space delimited). * `state` - An opaque value that will be included when redirecting back after the user accepts the authorisation. This is not required, but is important for [security considerations](http://www.thread-safe.com/2014/05/the-correct-use-of-state-parameter-in.html). After successful authorization by the user, the OAuth2 server will redirect back to your applications callback with the following query string parameters: * `code` - The authorization code. * `state` - The state parameter that was sent in the request. ## Verifying authorization The authorization code you acquired in the last step will now be exchanged for an access token. In order to do this you need to POST a request to `https://oauth2.api.jtl-software.com/token`. >POST > >Authorization: Basic `application_basic_auth`\ >Content-Type: application/x-www-form-urlencoded > >grant_type=authorization_code&code=`code`&redirect_uri=`redirect_uri` In the Authorization header [Basic HTTP authentication](https://tools.ietf.org/html/rfc7617) is used. Your application credentials `client_id` will be used as the username and your `client_secret` as the password. The header should have the value "Basic" plus the Base64 encoded string comprising of `client_id:client_secret`. The body of the request consist of the form encoded parameters: * `grant_type` - Must be set to "authorization_code". * `code` - The authorization code received from the previous step. * `redirect_uri` - Must match the `callback_uri` in your client credentials. A successful verification request will return a JSON response with the properties: * `token_type` - is always "Bearer" * `expires_in` - the time in seconds until the access token will expire * `access_token` - the access token used for API requests * `refresh_token` - token used to get a new access_token without needing to ask the user again Now the APIs endpoints that need authorization can be called by setting the header >Authorization: Bearer `access_token` ## Refreshing authorization To get a new `access_token` (for example when the old one expired) one can POST a request to `https://oauth2.api.jtl-software.com/token`. >POST > >Authorization: Basic `application_basic_auth`\ >Content-Type: application/x-www-form-urlencoded > >grant_type=refresh_token&refresh_token=`refresh_token` The Basic HTTP Authorization works exactly as in the verification step. The body of the request consist of the form encoded parameters: * `grant_type` - Must be set to "refresh_token". * `refresh_token` - The `refresh_token` you acquired during verification. The response will be the same as in the verification step. ## Scopes Scopes allow fine grained control over what actions are allowed for a given application. During login users must approve the requested scopes, so it is often feasible to limit asking for permissions your application really needs. Global scopes for common permission scenarios are the following: * `ffn.fulfiller.read` - full read access for the fulfiller API * `ffn.fulfiller.write` - full write access for the fulfiller API * `ffn.merchant.read` - full read access for the merchant API * `ffn.merchant.write` - full write access for the merchant API More fine grained scopes can be acquired from each respective endpoints documentation. ## Example ### Prerequsites * JTL Customer center account (https://kundencenter.jtl-software.de/) * cUrl (https://curl.se/) * FFN portal account (just login here: https://fulfillment.jtl-software.com) * FFN portal sandbox account (if you want to test on sandbox: https://fulfillment-sandbox.jtl-software.com) * Oauth Client for authorization and define scopes Values in this example (access_token, refresh_token, code...) are expired and cannot be used verbatim. ### Step 1 - Create an OAuth client Navigate to https://kundencenter.jtl-software.de/oauth and create a new OAuth client. (You can´t navigate to Oauth in customer account, you should use this link, or you can change logged in index to oauth) !Templates define what scopes are possible for this client. scopes with access rights: * ffn.merchant.read - full read access for the fulfiller API * ffn.merchant.write - full write access for the fulfiller API * ffn.fulfiller.read - full read access for the merchant API * ffn.fulfiller.write - full write access for the merchant API More fine grained scopes can be acquired from each respective endpoints documentation.  Overview: clients, scopes, client-secret and client-id  In our example: * client_id: 97170e65-d390-4633-ba46-d6ghef8222de * client_secret: f364ldUw3wGJFGn3JXE2NpGdCvUSMlmK72gsYg1z * redirect_uri: http://localhost:53972/ffn/sso The values for this client should not be used in production and are for testing only. ### Step 2 - User login In this step you will redirect the user to the JTL OAuth website using his default browser. Here the user will provide his username/password and accept the requested scopes. Finally the JTL Oauth website will redirect to the provided redirect_uri and provide the code. Template: authorize specified scopes and get code answer to request the access token ``` https://oauth2.api.jtl-software.com/authorize?response_type=code&redirect_uri=[redirect_uri]&client_id=[client_id]&scope=[scopes] ``` Note: the scopes should be seperated by spaces or %20 Filled with our example values: ``` https://oauth2.api.jtl-software.com/authorize?response_type=code&redirect_uri=http://localhost:53972/ffn/sso/oauth&client_id=97170e65-d390-4633-ba46-d6ghef8222de&scope=ffn.merchant.read%20ffn.merchant.write ``` * enter password  * authorize scopes  * code answer from server  Example of the answer from the OAuth server to our redirect_uri: ``` http://localhost:53972/ffn/sso?code=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 ``` Extract the code and note it for next steps. ### Step 3 - Get an access_token from the code Template: get access token + refresh token ``` curl --location --request POST "https://oauth2.api.jtl-software.com/token" --header "Content-Type: application/x-www-form-urlencoded" -u "[client_id]:[client_secret]" --data-urlencode "grant_type=authorization_code" --data-urlencode "redirect_uri=[redirect_uri]" --data-urlencode "code=[code]" ``` Filled with our example values: ``` curl --location --request POST "https://oauth2.api.jtl-software.com/token" --header "Content-Type: application/x-www-form-urlencoded" -u "97170e64-d390-4696-ba46-d6fcef8207de:f364ldUw3wIJFGn3JXE2NpGdAvUSMlmK72gsYg1z" --data-urlencode "grant_type=authorization_code" --data-urlencode "redirect_uri=http://localhost:49420/oauth" --data-urlencode "code=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" ``` The result will be a JSON answer with the users access_token and refresh_token as well as the expiry in seconds. ``` { "token_type":"Bearer", "expires_in":1800, "access_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiJ9. eyJhdWQiOiI5NzE3MGU2NC1kMzkwLTQ2OTYtYmE0Ni1kNmZjZWY4MjA3ZGUiLCJqdGkiOiJlOWVhN2Q0MWI1NDIzNTcyYWU0MDEzYjEzMDZiMGRkNWM3YmQ2ZTNjMDNhYTZmNjQ2M2NlMjUzNTc0ZmUyMWE3NGQyNTIyMTJhODQwMmI1ZCIsImlhdCI6MTY2MTI1MzE0OCwibmJmIjoxNjYxMjUzMTQ4LCJleHAiOjE2NjEyNTQ5NDgsInN1YiI6IjQ2MjA5Iiwic2NvcGVzIjpbImZmbi5tZXJjaGFudC5yZWFkIiwiZmZuLm1lcmNoYW50LndyaXRlIl19.eEwY021wR3BWVp-wbAVQrjfqwFbYqLlOV_ca-cb7-O3Kdpi8mkFQBxfI8rzSiV_1WpAINf4ydV9FR9Ty992SMiAqGJ3T9zDHd68oUDePeq7Xfafp-87UboI2mCfGd7518CoKVLqg5ohb4YCqgC7Dz588FofggCQyDZQSM-8raOgcM-pJ1TT7oRuYuDHsOzCOTPcX2YiGYKCc3M6kxlBy_NjrJoLa4qysLRmPkznWwj0caC7a0VJO5KubvECcMb9D7Byr3UNjI7GiGMAufa770V5qCjrWs4gOsRV-Bn7oQydvsL21qqjBKHcssQrlLZWmrcfKqgBKwfRXIx3Mu5HBCmtHjHMnuvPVEZAj6fEfIwjYSeTAHTHApEwbE7J1MPd8MU0K6X2YEUF315fXN5F3rO3ZL5FdTwcM1E-1-PKubLuMAaE6Lw-QsDtBoI4ESylomCmCCfgLV4Vj-in_oCJUmKXAX0tDSa9y9vb6oAExung_BTJCBemffCtkJ55Px7bvi9JXmwvI0pIFo3QzTUtRbFDizCMrPZvsatFx64mXX3IDoVqXr3uzvdetBIJEj2ngVdGRrKGt4Yboae5oFV2d5jdSZBL28pwGjey__ZB4zLR1DodQ0sOqDWJ3WsEjMYXU8_-IGrS8Kkw8Q0R0UqqyVLfcLr-cfH5tYqf2QLqAScY","refresh_token":"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" } ``` ### Step 4 - Test the access_token Using your newly aquired access_token you can test if its working (reminder: the access_token has a limited lifetime and might be expired, in which case we would need to refresh it (see Step 5)). Template: Test communication with access token on sandbox or production (our client is for both systems) ``` curl --location --request GET "https://ffn-sbx.api.jtl-software.com/api/v1/users/current" --header "Authorization: Bearer [access_token]" ``` If you cannot retrieve the user data using this endpoint make sure you have logged into our respective portal website (sandbox, production) at least once as this triggers user creation in the system. ### Step 5 - Refresh access_token when it expires Template: Get a new access token + refresh token with the refresh token ``` curl --location --request POST "https://oauth2.api.jtl-software.com/token" --header "Content-Type: application/x-www-form-urlencoded" -u "[client_id]:[client_secret]" --data-urlencode "grant_type=refresh_token" --data-urlencode "refresh_token=[refresh_token]" ``` Filled with our example values: ``` curl --location --request POST "https://oauth2.api.jtl-software.com/token" --header "Content-Type: application/x-www-form-urlencoded" -u "97170e64-d390-4696-ba46-d6fcef8207de:f364ldUw3wIJFGn3JXE2NpGdAvUSMlmK72gsYg1z" --data-urlencode "grant_type=refresh_token" --data-urlencode "refresh_token=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" ``` The result will be the same format as in step 3. Refresh_tokens are only valid for a single refresh and you will get a new refresh_token every single time that you must persist. ### My token is not working! #### 404 NotFound You need to log into the respective portal website (sandbox-https://fulfillment-sandbox.jtl-software.com, production-https://fulfillment.jtl-software.com) at least once to trigger user creation. #### 403 Forbidden You might be missing scopes in your token and don't have sufficient rights. #### 401 Forbidden Incorrect Oauth method. For example, we do not support the Oauth method authorisation "client_credentials grant". The authorisation method "code grant" with user must be used.
faisalijaz/laravelpassportsocialauthgrant
0 Downloads
This package will create social grant in order to authenticate user without username and password in laravel passport. It will only require platform and platform_user_id as params to issue tokens
eciboadaptech/finapi-webform
327 Downloads
The following pages give you some general information on how to use our APIs.The actual API services documentation then follows further below. You can use the menu to jump between API sections.This page has a built-in HTTP(S) client, so you can test the services directly from within this page, by filling in the request parameters and/or body in the respective services, and then hitting the TRY button. Note that you need to be authorized to make a successful API call. To authorize, refer to the 'Authorization' section of Access, or in case you already have a valid user token, just use the QUICK AUTH on the left.Please also remember that all user management functions should be looked up in Access.You should also check out the Web Form 2.0 Public Documentation as well as Access Public Documentation for more information. If you need any help with the API, contact [email protected] informationRequest IDsWith any API call, you can pass a request ID via a header with name "X-Request-Id". The request ID can be an arbitrary string with up to 255 characters. Passing a longer string will result in an error.If you don't pass a request ID for a call, finAPI will generate a random ID internally.The request ID is always returned back in the response of a service, as a header with name "X-Request-Id".We highly recommend to always pass a (preferably unique) request ID, and include it into your client application logs whenever you make a request or receive a response(especially in the case of an error response). finAPI is also logging request IDs on its end. Having a request ID can help the finAPI support team to work more efficiently and solve tickets faster.Type CoercionIn order to ease the integration for some languages, which do not natively support high precision number representations, Web Form 2.0 API supports relax type binding for the openAPI type number, which is used for money amount fields. If you use one of those languages, to avoid precision errors that can appear from float values, you can pass the amount as a string.FAQIs there a finAPI SDK?Currently we do not offer a native SDK, but there is the option to generate an SDKfor almost any target language via OpenAPI. Use the 'Download SDK' button on this page for SDK generation.Why do I need to keep authorizing when calling services on this page?This page is a "one-page-app". Reloading the page resets the OAuth authorization context. There is generally no need to reload the page, so just don't do it and your authorization will persist.
affixapi/api
13 Downloads
The affixapi.com API documentation. # Introduction Affix API is an OAuth 2.1 application that allows developers to access customer data, without developers needing to manage or maintain integrations; or collect login credentials or API keys from users for these third party systems. # OAuth 2.1 Affix API follows the [OAuth 2.1 spec](https://datatracker.ietf.org/doc/html/draft-ietf-oauth-v2-1-08). As an OAuth application, Affix API handles not only both the collection of sensitive user credentials or API keys, but also builds and maintains the integrations with the providers, so you don't have to. # How to obtain an access token in order to get started, you must: - register a `client_id` - direct your user to the sign in flow (`https://connect.affixapi.com` [with the appropriate query parameters](https://github.com/affixapi/starter-kit/tree/master/connect)) - capture `authorization_code` we will send to your redirect URI after the sign in flow is complete and exchange that `authorization_code` for a Bearer token # Sandbox keys (xhr mode) ### dev ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q' \ 'https://dev.api.affixapi.com/2023-03-01/xhr/employees' ``` ### prod ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.eyJwcm92aWRlciI6InNhbmRib3giLCJzY29wZXMiOlsiLzIwMjMtMDMtMDEveGhyL2NvbXBhbnkiLCIvMjAyMy0wMy0wMS94aHIvZW1wbG95ZWUiLCIvMjAyMy0wMy0wMS94aHIvZW1wbG95ZWVzIiwiLzIwMjMtMDMtMDEveGhyL2dyb3VwcyIsIi8yMDIzLTAzLTAxL3hoci9pZGVudGl0eSIsIi8yMDIzLTAzLTAxL3hoci9wYXlydW5zIiwiLzIwMjMtMDMtMDEveGhyL3BheXJ1bnMvOnBheXJ1bl9pZCIsIi8yMDIzLTAzLTAxL3hoci90aW1lLW9mZi1iYWxhbmNlcyIsIi8yMDIzLTAzLTAxL3hoci90aW1lLW9mZi1lbnRyaWVzIiwiLzIwMjMtMDMtMDEveGhyL3RpbWVzaGVldHMiLCIvMjAyMy0wMy0wMS94aHIvd29yay1sb2NhdGlvbnMiXSwidG9rZW4iOiIzYjg4MDc2NC1kMGFmLTQ5ZDAtOGM5OS00YzIwYjE2MTJjOTMiLCJpYXQiOjE3MTE4MTA4NTgsImlzcyI6InB1YmxpY2FwaS1pbnRlcm1lZGlhdGUucHJvZC5lbmdpbmVlcmluZy5hZmZpeGFwaS5jb20iLCJzdWIiOiJ4aHIiLCJhdWQiOiIwOEJCMDgxRS1EOUFCNEQxNC04REY5OTIzMy02NjYxNUNFOSJ9.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg' \ 'https://api.affixapi.com/2023-03-01/xhr/employees' ``` # Compression We support `brotli`, `gzip`, and `deflate` compression algorithms. To enable, pass the `Accept-Encoding` header with one or all of the values: `br`, `gzip`, `deflate`, or `identity` (no compression) In the response, you will receive the `Content-Encoding` response header indicating the compression algorithm used in the data payload to enable you to decompress the result. If the `Accept-Encoding: identity` header was passed, no `Content-Encoding` response header is sent back, as no compression algorithm was used. # Webhooks An exciting feature for HR/Payroll modes are webhooks. If enabled, your `webhook_uri` is set on your `client_id` for the respective environment: `dev | prod` Webhooks are configured to make live requests to the underlying integration 1x/hr, and if a difference is detected since the last request, we will send a request to your `webhook_uri` with this shape: ``` { added: [ { ..., date_of_birth: '2010-08-06', display_full_name: 'Daija Rogahn', employee_number: '57993', employment_status: 'pending', employment_type: 'other', employments: [ { currency: 'eur', effective_date: '2022-02-25', employment_type: 'other', job_title: 'Dynamic Implementation Manager', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 96000, }, ], first_name: 'Daija', ... } ], removed: [], updated: [ { ..., date_of_birth: '2009-11-09', display_full_name: 'Lourdes Stiedemann', employee_number: '63189', employment_status: 'leave', employment_type: 'full_time', employments: [ { currency: 'gbp', effective_date: '2023-01-16', employment_type: 'full_time', job_title: 'Forward Brand Planner', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 86000, }, ], first_name: 'Lourdes', } ] } ``` the following headers will be sent with webhook requests: ``` x-affix-api-signature: ab8474e609db95d5df3adc39ea3add7a7544bd215c5c520a30a650ae93a2fba7 x-affix-api-origin: webhooks-employees-webhook user-agent: affixapi.com ``` Before trusting the payload, you should sign the payload and verify the signature matches the signature sent by the `affixapi.com` service. This secures that the data sent to your `webhook_uri` is from the `affixapi.com` server. The signature is created by combining the signing secret (your `client_secret`) with the body of the request sent using a standard HMAC-SHA256 keyed hash. The signature can be created via: - create an `HMAC` with your `client_secret` - update the `HMAC` with the payload - get the hex digest -> this is the signature Sample `typescript` code that follows this recipe: ``` import { createHmac } from 'crypto'; export const computeSignature = ({ str, signingSecret, }: { signingSecret: string; str: string; }): string => { const hmac = createHmac('sha256', signingSecret); hmac.update(str); const signature = hmac.digest('hex'); return signature; }; ``` While verifying the Affix API signature header should be your primary method of confirming validity, you can also whitelist our outbound webhook static IP addresses. ``` dev: - 52.210.169.82 - 52.210.38.77 - 3.248.135.204 prod: - 52.51.160.102 - 54.220.83.244 - 3.254.213.171 ``` ## Rate limits Open endpoints (not gated by an API key) (applied at endpoint level): - 15 requests every 1 minute (by IP address) - 25 requests every 5 minutes (by IP address) Gated endpoints (require an API key) (applied at endpoint level): - 40 requests every 1 minute (by IP address) - 40 requests every 5 minutes (by `client_id`) Things to keep in mind: - Open endpoints (not gated by an API key) will likely be called by your users, not you, so rate limits generally would not apply to you. - As a developer, rate limits are applied at the endpoint granularity. - For example, say the rate limits below are 10 requests per minute by ip. from that same ip, within 1 minute, you get: - 10 requests per minute on `/orders`, - another 10 requests per minute on `/items`, - and another 10 requests per minute on `/identity`, - for a total of 30 requests per minute.
citypay/citypay-api-client-php
128 Downloads
Welcome to the CityPay API, a robust HTTP API payment solution designed for seamless server-to-server transactional processing. Our API facilitates a wide array of payment operations, catering to diverse business needs. Whether you're integrating Internet payments, handling Mail Order/Telephone Order (MOTO) transactions, managing Subscriptions with Recurring and Continuous Authority payments, or navigating the complexities of 3-D Secure authentication, our API is equipped to support your requirements. Additionally, we offer functionalities for Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids, and Completion processing, alongside the capability for tokenised payments. ## Compliance and Security Overview Ensuring the security of payment transactions and compliance with industry standards is paramount. Our API is designed with stringent security measures and compliance protocols to safeguard sensitive information and meet the rigorous requirements of Visa, MasterCard, and the PCI Security Standards Council. ### Key Compliance and Security Measures * **TLS Encryption**: All data transmissions must utilise TLS version 1.2 or higher, employing [strong cryptography](#enabled-tls-ciphers). Our infrastructure strictly enforces this requirement to maintain the integrity and confidentiality of data in transit. We conduct regular scans and assessments of our TLS endpoints to identify and mitigate vulnerabilities. * **Data Storage Prohibitions**: Storing sensitive cardholder data (CHD), such as the card security code (CSC) or primary account number (PAN), is strictly prohibited. Our API is designed to minimize your exposure to sensitive data, thereby reducing your compliance burden. * **Data Masking**: For consumer protection and compliance, full card numbers must not be displayed on receipts or any customer-facing materials. Our API automatically masks PANs, displaying only the last four digits to facilitate safe receipt generation. * **Network Scans**: If your application is web-based, regular scans of your hosting environment are mandatory to identify and rectify potential vulnerabilities. This proactive measure is crucial for maintaining a secure and compliant online presence. * **PCI Compliance**: Adherence to PCI DSS standards is not optional; it's a requirement for operating securely and legally in the payments ecosystem. For detailed information on compliance requirements and resources, please visit the PCI Security Standards Council website [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/). * **Request Validation**: Our API includes mechanisms to verify the legitimacy of each request, ensuring it pertains to a valid account and originates from a trusted source. We leverage remote IP address verification alongside sophisticated application firewall technologies to thwart a wide array of common security threats. ## Getting Started Before integrating with the CityPay API, ensure your application and development practices align with the outlined compliance and security measures. This preparatory step is crucial for a smooth integration process and the long-term success of your payment processing operations. For further details on API endpoints, request/response formats, and code examples, proceed to the subsequent sections of our documentation. Our aim is to provide you with all the necessary tools and information to integrate our payment processing capabilities seamlessly into your application. Thank you for choosing CityPay API. We look forward to supporting your payment processing needs with our secure, compliant, and versatile API solution.
alissonlinneker/statuspage-php-sdk
4 Downloads
# Code of Conduct Please don't abuse the API, and please report all feature requests and issues to https://support.atlassian.com/contact # Rate Limiting Each API token is limited to 1 request / second as measured on a 60 second rolling window. To get this limit increased, please contact us at https://support.atlassian.com/contact Error codes 420 or 429 indicate that you have exceeded the rate limit and the request has been rejected. # Basics ## HTTPS It's required ## URL Prefix In order to maintain version integrity into the future, the API is versioned. All calls currently begin with the following prefix: https://api.statuspage.io/v1/ ## RESTful Interface Wherever possible, the API seeks to implement repeatable patterns with logical, representative URLs and descriptive HTTP verbs. Below are some examples and conventions you will see throughout the documentation. * Collections are buckets: https://api.statuspage.io/v1/pages/asdf123/incidents.json * Elements have unique IDs: https://api.statuspage.io/v1/pages/asdf123/incidents/jklm456.json * GET will retrieve information about a collection/element * POST will create an element in a collection * PATCH will update a single element * PUT will replace a single element in a collection (rarely used) * DELETE will destroy a single element ## Sending Data Information can be sent in the body as form urlencoded or JSON, but make sure the Content-Type header matches the body structure or the server gremlins will be angry. All examples are provided in JSON format, however they can easily be converted to form encoding if required. Some examples of how to convert things are below: // JSON { "incident": { "name": "test incident", "components": ["8kbf7d35c070", "vtnh60py4yd7"] } } // Form Encoded (using curl as an example): curl -X POST https://api.statuspage.io/v1/example \ -d "incident[name]=test incident" \ -d "incident[components][]=8kbf7d35c070" \ -d "incident[components][]=vtnh60py4yd7" # Authentication
delirius/contao-structure-elements
720 Downloads
HTML Struktur Element erstellt jeweils ein Start- und ein Stop-Element anwendbar als Inhaltselement oder als Formularelement. Im Start-Element können HTML-Tag, ID, Klasse und eigene Attribute definiert werden.
cbeyersdorf/easybill
1 Downloads
The first version of the easybill REST API. [CHANGELOG](https://api.easybill.de/rest/v1/CHANGELOG.md) ## Authentication You can choose between two available methods: `Basic Auth` or `Bearer Token`. In each HTTP request, one of the following HTTP headers is required: ``` # Basic Auth Authorization: Basic base64_encode(':') # Bearer Token Authorization: Bearer ``` ## Limitations ### Request Limit * PLUS: 10 requests per minute * BUSINESS: 60 requests per minute If the limit is exceeded, you will receive the HTTP error: `429 Too Many Requests` ### Result Limit All result lists are limited to 100 by default. This limit can be increased by the query parameter `limit` to a maximum of 1000. ## Query filter Many list resources can be filtered. In `/documents` you can filter e.g. by number with `/documents?number=111028654`. If you want to filter multiple numbers, you can either enter them separated by commas `/documents?number=111028654,222006895` or as an array `/documents?number[]=111028654&number[]=222006895`. **Warning**: The maximum size of an HTTP request line in bytes is 4094. If this limit is exceeded, you will receive the HTTP error: `414 Request-URI Too Large` ### Escape commas in query You can escape commans in query `name=Patrick\, Peter` if you submit the header `X-Easybill-Escape: true` in your request. ## Property login_id This is the login of your admin or employee account. ## Date and Date-Time format Please use the timezone `Europe/Berlin`. * **date** = *Y-m-d* = `2016-12-31` * **date-time** = *Y-m-d H:i:s* = `2016-12-31 03:13:37` Date or datetime can be `null` because the attributes have been added later and the entry is older.