Libraries tagged by connection parameters

## API Versioning We're constantly updating and improving the API, and while we try to ensure backwards compatibility, there's always a chance that we'll introduce a change that affects the way your app works. To get around any problems that this might cause, we recommend that you include the Accept header with every API request that you make. This header enables you to target your request to a particular version of the API. It looks like this in HTTP: ```text Accept: application/vnd.saitowag.api+json;version={version_number} ``` Normally, you set the value of the placeholder to the current version of the API. But if you're troubleshooting your app, and you know that an older version of the API works perfectly, say version 1.0, you'd substitute 1.0 for the placeholder value. The API then handles the request as if it were for version 1.0, and your app goes back to working properly. ### Example of an error with invalid `ACCEPT` header. The `HTTP status code` in case of an invalid `ACCEPT` header will be `400 Bad Request` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_ACCEPT_HEADER_NOT_VALID", "error_message": "Accept header is not valid or not set." } ] } ``` ### Unexpected Error If an unexpected error occours, a so called Error General will be returned. The `HTTP status code` in case of an invalid `ACCEPT` header will be `500` and the following response will be returned. ```json { "data": [ { "error_code": "ERR_GENERAL", "error_message": "An unexpected error has occurred. If this problem persists, please contact our support." } ] } ``` ### Invalid Endpoint Error Any call to a non-existing API endpoint (i.e. wrong route) will return a response with `HTTP status code` `404` and the following response body: ```json { "data": [ { "error_code": "ERR_GENERAL_INVALID_ENDPOINT", "error_message": "The requested endpoint does not exist." } ] } ``` Please, note that this error is returned also when a request parameter, part of a valid route, is not well formed. For example, a call to a route that contains a wrong order id (i.e. it does not meet the accepted order id pattern - e.g. 123456789PAC instead of PAC123456789) will return the error just mentioned, as the route is considered as badly formed. In conclusion, please pay special attention to all those routes that have request parameters with specific pattern requirements. ### Shipping Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | Standard `Standard` | | 2 | Self-collection `Selbstabholung` | | 3 | Express morning (truck) `Express-Morgen (LKW)` | | 4 | Express Today (Truck) `Express-Heute (LKW)` | | 5 | Express morning (package forwarding) `Express-Morgen (Packet Spedition)` | | 7 | Express-now | ### Payment Method IDs These ids may not be available in all the countries. | ID | Name | | --- | --- | | 1 | SEPA Direct Debit `SEPA-Lastschrift` | | 2 | Prepayment `Vorkasse` | | 3 | Cash on delivery `Nachnahme` | | 4 | PayPal/Credit Card `PayPal/Kreditkarte` | | 5 | open payment method `offene Zahlungsart` | | 7 | Invoice(8 days payment term) `Rechnung(8 Tage Zahlungsziel)` | | 8 | open payment method (SEPA) `offene Zahlungsart (SEPA)` | ## Query String Filters Query String Filters | Operator | Full Name | Description | Example | | ------ | ------ | ------ | ------ | | eq | Equal | Used to narrow down the result of a query to some specific value, for specified field. It adds the "**=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=eq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} = 11` | integer: `{url}?filter[id]=eq;21`float: `{url}?filter[average]=eq;3.7`string: `{url}?filter[free_text]=eq;apple`Date: `{url}?filter[birthday]=eq;2020-06-03`DateTime: `{url}?filter[created_at]=eq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=eq;1` | | neq | Not equal | Used to exclude the value from a query result. It adds the "****" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=neq;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} 11` | integer: `{url}?filter[id]=neq;21`float: `{url}?filter[average]=neq;3.7`string: `{url}?filter[free_text]=neq;apple`Date: `{url}?filter[birthday]=neq;2020-06-03`DateTime: `{url}?filter[created_at]=neq;2020-06-03 14:32:32`boolean: `{url}?filter[is_active]=neq;1` | | gt | Greater than | Used to reduce fetched values to those greater than the one provided in a query string. It adds the "**>**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gt;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} > 11` | integer: `{url}?filter[id]=gt;21`float: `{url}?filter[average]=gt;3.7`Date: `{url}?filter[birthday]=gt;2020-06-03`DateTime: `{url}?filter[created_at]=gt;2020-06-03 14:32:32` | | gte | Greater than or equal | Used to reduce fetched values to those greater than or equal to the one provided in a query string. It adds the "**>=**" symbol to the SQL query. Eg. `{url}?filter[{alias_name}]=gte;11` will result in the following sql: `SELECT {field_name} AS {alias_name} FROM {table_name} WHERE {alias_name} >= 11` | integer: `{url}?filter[id]=gte;21`float: `{url}?filter[average]=gte;3.7`Date: `{url}?filter[birthday]=gte;2020-06-03`DateTime: `{url}?filter[created_at]=gte;2020-06-03 14:32:32` | | lt | Less than | Used to reduce fetched values to those less than provided in a query string. It adds the "**

Go to Download

The affixapi.com API documentation. # Introduction Affix API is an OAuth 2.1 application that allows developers to access customer data, without developers needing to manage or maintain integrations; or collect login credentials or API keys from users for these third party systems. # OAuth 2.1 Affix API follows the [OAuth 2.1 spec](https://datatracker.ietf.org/doc/html/draft-ietf-oauth-v2-1-08). As an OAuth application, Affix API handles not only both the collection of sensitive user credentials or API keys, but also builds and maintains the integrations with the providers, so you don't have to. # How to obtain an access token in order to get started, you must: - register a `client_id` - direct your user to the sign in flow (`https://connect.affixapi.com` [with the appropriate query parameters](https://github.com/affixapi/starter-kit/tree/master/connect)) - capture `authorization_code` we will send to your redirect URI after the sign in flow is complete and exchange that `authorization_code` for a Bearer token # Sandbox keys (xhr mode) ### dev ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.zUJPaT6IxcIdr8b9iO6u-Rr5I-ohTHPYTrQGrgOFghbEbovItiwr9Wk479GnJVJc3WR8bxAwUMAE4Ul6Okdk6Q' \ 'https://dev.api.affixapi.com/2023-03-01/xhr/employees' ``` ### prod ``` eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg ``` #### `employees` endpoint sample: ``` curl --fail \ -X GET \ -H 'Authorization: Bearer eyJhbGciOiJFUzI1NiIsImtpZCI6Ims5RmxwSFR1YklmZWNsUU5QRVZzeFcxazFZZ0Zfbk1BWllOSGVuOFQxdGciLCJ0eXAiOiJKV1MifQ.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.n3pJmmfegU21Tko_TyUyCHi4ITvfd75T8NFFTHmf1r8AI8yCUYTWdfNjyZZWcZD6z50I3Wsk2rAd8GDWXn4vlg' \ 'https://api.affixapi.com/2023-03-01/xhr/employees' ``` # Compression We support `brotli`, `gzip`, and `deflate` compression algorithms. To enable, pass the `Accept-Encoding` header with one or all of the values: `br`, `gzip`, `deflate`, or `identity` (no compression) In the response, you will receive the `Content-Encoding` response header indicating the compression algorithm used in the data payload to enable you to decompress the result. If the `Accept-Encoding: identity` header was passed, no `Content-Encoding` response header is sent back, as no compression algorithm was used. # Webhooks An exciting feature for HR/Payroll modes are webhooks. If enabled, your `webhook_uri` is set on your `client_id` for the respective environment: `dev | prod` Webhooks are configured to make live requests to the underlying integration 1x/hr, and if a difference is detected since the last request, we will send a request to your `webhook_uri` with this shape: ``` { added: [ { ..., date_of_birth: '2010-08-06', display_full_name: 'Daija Rogahn', employee_number: '57993', employment_status: 'pending', employment_type: 'other', employments: [ { currency: 'eur', effective_date: '2022-02-25', employment_type: 'other', job_title: 'Dynamic Implementation Manager', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 96000, }, ], first_name: 'Daija', ... } ], removed: [], updated: [ { ..., date_of_birth: '2009-11-09', display_full_name: 'Lourdes Stiedemann', employee_number: '63189', employment_status: 'leave', employment_type: 'full_time', employments: [ { currency: 'gbp', effective_date: '2023-01-16', employment_type: 'full_time', job_title: 'Forward Brand Planner', pay_frequency: 'semimonthly', pay_period: 'YEAR', pay_rate: 86000, }, ], first_name: 'Lourdes', } ] } ``` the following headers will be sent with webhook requests: ``` x-affix-api-signature: ab8474e609db95d5df3adc39ea3add7a7544bd215c5c520a30a650ae93a2fba7 x-affix-api-origin: webhooks-employees-webhook user-agent: affixapi.com ``` Before trusting the payload, you should sign the payload and verify the signature matches the signature sent by the `affixapi.com` service. This secures that the data sent to your `webhook_uri` is from the `affixapi.com` server. The signature is created by combining the signing secret (your `client_secret`) with the body of the request sent using a standard HMAC-SHA256 keyed hash. The signature can be created via: - create an `HMAC` with your `client_secret` - update the `HMAC` with the payload - get the hex digest -> this is the signature Sample `typescript` code that follows this recipe: ``` import { createHmac } from 'crypto'; export const computeSignature = ({ str, signingSecret, }: { signingSecret: string; str: string; }): string => { const hmac = createHmac('sha256', signingSecret); hmac.update(str); const signature = hmac.digest('hex'); return signature; }; ``` While verifying the Affix API signature header should be your primary method of confirming validity, you can also whitelist our outbound webhook static IP addresses. ``` dev: - 52.210.169.82 - 52.210.38.77 - 3.248.135.204 prod: - 52.51.160.102 - 54.220.83.244 - 3.254.213.171 ``` ## Rate limits Open endpoints (not gated by an API key) (applied at endpoint level): - 15 requests every 1 minute (by IP address) - 25 requests every 5 minutes (by IP address) Gated endpoints (require an API key) (applied at endpoint level): - 40 requests every 1 minute (by IP address) - 40 requests every 5 minutes (by `client_id`) Things to keep in mind: - Open endpoints (not gated by an API key) will likely be called by your users, not you, so rate limits generally would not apply to you. - As a developer, rate limits are applied at the endpoint granularity. - For example, say the rate limits below are 10 requests per minute by ip. from that same ip, within 1 minute, you get: - 10 requests per minute on `/orders`, - another 10 requests per minute on `/items`, - and another 10 requests per minute on `/identity`, - for a total of 30 requests per minute.

Go to Download